Jumper T8SG - First TX stock running on Deviation

Fernandez wrote: I hope that Jumper will make the next model more in a shape like Turnigy evolution, inc the the hall gimbals and an embedded antenna and indeed add the voice mod, it would be me ideal controller.
Deviation it is super, I never ahd any control related issues and still stongly believe a control of the RF over SPI is the best solution out there, beter than Taranis with module via pxx etc.

And I hope that the hall gimbals will be available for the current release

Iroquois wrote: The original sticks are ajustable over a fair range, but there's no way of locking them other than a spot of glue

A simple lock nut (M3) will also do the trick, no glue needed.

Why didn't I think of that?

Hello there,

After lurking this thread for some weeks, I jumped in and bought the jumper (pun intended). Finally I did received mine today and so far I have noticed:

• the battery rack is installed (and I can confirm the Turnigy 1600 to be a nice fit)
  
• the USB port is the accessible one
  
• it beeps in addition to vibration,
  
• the installed firmware is the specific T8SG build dated from the 05/10 (special thanks to vlad_vy on that)

Should I update it first thing?

ltwvince wrote:

dc59 wrote: Jumper replied, both T8SG & DEVO hall gimbals are at molding stage now, beta version will be released soon.

If they can give good price for beta testing, please let us know. I have this T8SG, Devo 7E and Devo 12E. Thanks.

IMHO :

• Beta testing should not imply payment from the tester, but should be seen as a gracious opportunity for the brand to have dedicated and motivated ressources in their team.
• And should a payment be done to guarantee the "motivation" from the maker POV, it should be clear that the testers will be upgraded and receive the final product in the end as an acknowledgement of their efforts.

Those are the only win-win scenario I could think of and see as acceptable.

Hi FDR,

Jumper got problem when they try to register Deviation account, I send you a PM for it.

Jumper tried to install a 2.4 inch OLED to Devo7E , but it doesn't work , can anyone help to build a correct firmware?
They follow this post :
www.deviationtx.com/forum/7-development/...-screen?limitstart=0
and try to modify LCD.C , but they failed.

OLED data sheet is attached.

FDR wrote: I've activated them manually.
Please tell them to try to log in.
If they can't, I'll need to put them on the white list...

Thanks FDR, I will ask Jumper to login again.

Connection of Jumper's OLED pin out.

One more question , except Moeder , is there any other developer didn't get sample T8SG? if yes, please let me know , thank you.

New schematic

Jumper's first batch of T8SG analog/digital hall sensor gimbals and Walkera DEVO hall sensor gimbals will be released at end of November , of course these upgrade kits will send to Deviation developers for further testing.

dc59 wrote: Jumper's first batch of T8SG analog/digital hall sensor gimbals and Walkera DEVO hall sensor gimbals will be released at end of November , of course these upgrade kits will send to Deviation developers for further testing.

Great news

Just got my Jumper T8SG, manual indicated to have my firmware updated which I did (10-27).

I was about to bind my drone when observed that both aux4 and aux5 didn't respond in the channel monitor.

Is it a firmware issue (wasn't able to test the old one) or is it a hardware issue? Or am I just missing something.

Any info would be helpful before I send it back.

Thank you

try to calibrate all controls (including aux4/5)

When creating in the mixer page, the switches are detected when you are at the source but aux 4 and aux 5 aren't picked up.

Hi Deviation developers , "norulers" is Jumper's contact window , his first post .