Load next model on switch?

Is there any way to configure Deviation to cycle through the model list on a switch? Say for example the Hold switch (2 position), if I'm on Model 1 and I flick the switch down it loads Model 2, switch up loads Model 3, down again loads model 4 etc? If not can you switch between 2 models using a switch? I'm often switching between my 2 micros and it'd be easier than the 10 button presses it takes now to switch.

Thanks!

could it be a good idea to have access to the model selection with long press enter(my Spektrum DX8 does it this way, and its very handy) ?
in my case i would like this option to restart autobinding if i select the same model again.
Would be fine to not powercycle the transmitter every 4 Minutes because replacing battery at my micro quads.

I like this idea as long as long-press on exit backs out of all of the menus immediately to the flight screen. Would drop the number of presses from 10+ to ~4 to switch between adjacent models.

Well, you can use quick pages for that....a quick forum search revealed this old post .

I forgot quick pages was a thing! I think I've accidentally used it once, will give it a try tonight for this purpose.

Well that works amazingly well, 4 clicks to switch models. Thanks!

tested with my 12s
its not so comfortable
Best would be to add the "load models" page to the quickpages selection list.

Would be fine to have the option via Buttons, too. My fingers are pretty big, and pull the stylus for one click is overkill

Wene001 wrote: Best would be to add the "load models" page to the quickpages selection list.

I've never done development on a platform like this but it seems like adding another option to the quickpages list shouldn't be too hard? Anyone want to point me in the right direction of what C files to look at? I'm willing to have a crack at it!

Chimera wrote: I've never done development on a platform like this but it seems like adding another option to the quickpages list shouldn't be too hard? Anyone want to point me in the right direction of what C files to look at? I'm willing to have a crack at it!

While looking into the code I noticed that ENT long pressed is not used yet, so why not use this to get into load model dialog? _action_cb() seems like a good place to start looking ...

It doesn't even really need to be an unused button, I just need to be able to add the "model load" page as a selectable option in the quickpage selector then it can be assigned to any of the "Menu 1-4" options in the main page config.

Moeder wrote: While looking into the code I noticed that ENT long pressed is not used yet, so why not use this to get into load model dialog? _action_cb() seems like a good place to start looking ...

For me this would be the preferred way to go.
ENT(long) would be available on all models...Quick page must be configured @ every modelfile, and can be used for other features
And loading the same model again please do (re)autobind

Wene001 wrote:

Moeder wrote: While looking into the code I noticed that ENT long pressed is not used yet, so why not use this to get into load model dialog? _action_cb() seems like a good place to start looking ...

For me this would be the preferred way to go.
ENT(long) would be available on all models...Quick page must be configured @ every modelfile, and can be used for other features
And loading the same model again please do (re)autobind

Couldn't you just edit the default model.ini file to include the Quick page settings?

vlad_vy wrote: ENT long press is not possible for 128x64 GUI main page since it use BUTTON_PRESS, it will always call Menu with any ENT press. For 320x240 GUI it possible since it use BUTTON_RELEASE.

True, I honestly didn't dig to deep in the code Still thus seems like an interesting feature to implement