- Posts: 7
Frsky D8 protocol not available on Jumper T8SG
- dadscoolcatlover
- Topic Author
- Offline
Less
More
13 Mar 2018 15:15 #68042
by dadscoolcatlover
Frsky D8 protocol not available on Jumper T8SG was created by dadscoolcatlover
Am having difficulty Binding to my Eachine E010S with Frsky RX on board to my Jumper T8SG Tx. Instructions call for Frsky D8 protocol, only ones are Frsky, FrskyX, and Frsky12. Any help would be greatly appreciated.
DC
DC
Please Log in or Create an account to join the conversation.
- hexfet
- Away
Less
More
- Posts: 1892
13 Mar 2018 16:51 #68045
by hexfet
Replied by hexfet on topic Frsky D8 protocol not available on Jumper T8SG
Frsky is the D8 protocol. FrskyX is D16. Frsky-V8 is for the older V series.
Please Log in or Create an account to join the conversation.
- dadscoolcatlover
- Topic Author
- Offline
Less
More
- Posts: 7
13 Mar 2018 19:01 #68047
by dadscoolcatlover
Replied by dadscoolcatlover on topic Frsky D8 protocol not available on Jumper T8SG
I tried to bind to the EO10S using all of the Frsky protocols including Frsky on my Jumper T8SG and still no bind. Is there an additional setting that needs to be set to? I noticed there is additional settings when you hit ent on the Frsky protocol.
DC
DC
Please Log in or Create an account to join the conversation.
- hexfet
- Away
Less
More
- Posts: 1892
13 Mar 2018 23:14 #68049
by hexfet
Replied by hexfet on topic Frsky D8 protocol not available on Jumper T8SG
Try changing the freq-fine setting in steps of 10 (up and down) to find a value where it binds. If successful, find the min and max values where the connection is lost and keep freq-fine at a value in the middle. Though on my t8sg there's no problem binding with it at 0 so it could be some other issue.
Please Log in or Create an account to join the conversation.
Time to create page: 0.074 seconds
- Home
- Forum
- General
- General Discussions
- Frsky D8 protocol not available on Jumper T8SG