- Posts: 2
Binding a frsky xm+ full range to Devo 7E
- Aurora
- Topic Author
- Offline
Less
More
29 Mar 2018 11:44 #68402
by Aurora
Binding a frsky xm+ full range to Devo 7E was created by Aurora
Hi there, I am having no luck binding my modded Devo 7E to my bnf furibee x215 pro that came with a frsky xm+ full range reciever! I selected mode frsky x and it does not work! However seen a video where one was trying to trouble shoot the binding issue and noticed he set the frequency down to -20 that seems to work for the binding process! The problem is it seems to glitch! What am I missing? Is the xm+ full range compatible?
Please Log in or Create an account to join the conversation.
- aMax
- Offline
Less
More
- Posts: 776
29 Mar 2018 15:36 - 29 Mar 2018 15:48 #68407
by aMax
Devo7e, TaranisQ X7, R9M , 4in1 MM, Futaba FC18plusV3.2 & DFT/FLD-02
Replied by aMax on topic Binding a frsky xm+ full range to Devo 7E
My XM+ is on "0" (FCC firmware)at the 7e and yes it is capable for nearly 800m at my quad .
Take care of the antenna orientation and set the fail safe as described (manual > bind button).
If you have the tools, get the recent firmware for 8 or16CH and RSSI at CH 8 or16 on the OSD.
Edit: If you have the 10cm antenna wires check the exposed part. On my older receiver these antennas are 15 cm long
and the exposed part is a tiny tad more than a quarter wave length
Take care of the antenna orientation and set the fail safe as described (manual > bind button).
If you have the tools, get the recent firmware for 8 or16CH and RSSI at CH 8 or16 on the OSD.
Edit: If you have the 10cm antenna wires check the exposed part. On my older receiver these antennas are 15 cm long
and the exposed part is a tiny tad more than a quarter wave length
Devo7e, TaranisQ X7, R9M , 4in1 MM, Futaba FC18plusV3.2 & DFT/FLD-02
Last edit: 29 Mar 2018 15:48 by aMax. Reason: edit
Please Log in or Create an account to join the conversation.
- Aurora
- Topic Author
- Offline
Less
More
- Posts: 2
29 Mar 2018 21:28 #68409
by Aurora
Replied by Aurora on topic Binding a frsky xm+ full range to Devo 7E
When you say set the failsafe as described can you explain to me how to set it up?
Please Log in or Create an account to join the conversation.
- hexfet
- Away
Less
More
- Posts: 1892
30 Mar 2018 02:31 #68416
by hexfet
Replied by hexfet on topic Binding a frsky xm+ full range to Devo 7E
Change the freq-fine setting to more negative values and see if the glitching stops. Keep going till it starts glitching again, then set freq-fine to a value in the middle.Aurora wrote: ... set the frequency down to -20 that seems to work for the binding process! The problem is it seems to glitch! What am I missing? Is the xm+ full range compatible?
Please Log in or Create an account to join the conversation.
Time to create page: 0.039 seconds
- Home
- Forum
- General
- General Discussions
- Binding a frsky xm+ full range to Devo 7E