MJX X601H

Start
Prev
1
Next
End

rond
Topic Author
Offline

05 Sep 2018 01:26 #70649 by rond

MJX X601H was created by rond

New member with a problem unlocking the motors on the X601H. I have the Jumper T8SG Plus and it binds but I can not unlock the motors. Does anyone know what channel I should be looking at? Thanks

Please Log in or Create an account to join the conversation.

C0ckpitvue 777
Offline

05 Sep 2018 01:30 #70650 by C0ckpitvue 777

Replied by C0ckpitvue 777 on topic MJX X601H

Maybe this can help,

Please Log in or Create an account to join the conversation.

C0ckpitvue 777
Offline

05 Sep 2018 01:31 #70651 by C0ckpitvue 777

Replied by C0ckpitvue 777 on topic MJX X601H

Video by frequent flyer rc.

Please Log in or Create an account to join the conversation.

rond
Topic Author
Offline

05 Sep 2018 13:19 #70660 by rond

Replied by rond on topic MJX X601H

thanks for the reply
I have tried this and it binds but the motors won't start

Please Log in or Create an account to join the conversation.

hexfet
Offline

05 Sep 2018 16:07 - 05 Sep 2018 22:57 #70664 by hexfet

Replied by hexfet on topic MJX X601H

<info removed> This post had bugs3 information. See below for MJXq.

Last edit: 05 Sep 2018 22:57 by hexfet.

Please Log in or Create an account to join the conversation.

C0ckpitvue 777
Offline

05 Sep 2018 17:44 - 05 Sep 2018 18:52 #70666 by C0ckpitvue 777

Replied by C0ckpitvue 777 on topic MJX X601H

Which switch is channel 10 on the devo10?

Last edit: 05 Sep 2018 18:52 by C0ckpitvue 777.

Please Log in or Create an account to join the conversation.

propnut
Offline

05 Sep 2018 22:06 #70669 by propnut

Replied by propnut on topic MJX X601H

Whatever switch you want it to be. It is fully customisable. Set it up under mixes.

Please Log in or Create an account to join the conversation.

rond
Topic Author
Offline

05 Sep 2018 22:45 #70670 by rond

Replied by rond on topic MJX X601H

Thanks but channel 5 appears to control the lights on and off on this model

Please Log in or Create an account to join the conversation.

hexfet
Offline

05 Sep 2018 22:57 - 05 Sep 2018 23:02 #70671 by hexfet

Replied by hexfet on topic MJX X601H

Sorry I had the wrong protocol. Skipped through the video too fast. Edited the previous post.

The channel information is in the user manual (copied below). Maybe try selecting H26HW format. Or perhaps the X601H has a slightly different protocol. Is there a separate "motor on" button or switch on the stock transmitter?

The MJXq protocol supports 12 channels and only supports auto-binding.

The first four channels are Aileron, Elevator, Throttle and Rudder.

Channel 5 controls LEDs, or arm if H26WH format is selected.

Channel 6 controls Flip mode.

Channel 7 controls the still camera

Channel 8 controls the video camera.

Channel 9 controls headless mode.

Channel 10 controls RTH mode

Channel 11 controls autoflip (X600 & X800 formats) or camera pan

Channel 12 controls camera tilt

Last edit: 05 Sep 2018 23:02 by hexfet.

Please Log in or Create an account to join the conversation.

rond
Topic Author
Offline

06 Sep 2018 11:43 #70685 by rond

Replied by rond on topic MJX X601H

Thanks again, I will try H26WH
yes there is an unlock button on the stock transmitter

Please Log in or Create an account to join the conversation.

rond
Topic Author
Offline

07 Sep 2018 15:50 #70726 by rond

Replied by rond on topic MJX X601H

okay that doesn't work
there must be some way to turn on the motors

Please Log in or Create an account to join the conversation.

hexfet
Offline

12 Sep 2018 19:46 #70853 by hexfet

Replied by hexfet on topic MJX X601H

Maybe not if the protocol is different. Would need SPI captures from the stock transmitter to be sure.

Have you tried all the channels in the protocol? Maybe one is used for arming in this model.

Please Log in or Create an account to join the conversation.

rond
Topic Author
Offline

13 Sep 2018 01:36 #70863 by rond

Replied by rond on topic MJX X601H

yes I did try all the channels with no luck
I am going to try and download the bugs 3 software and see if it will work

Please Log in or Create an account to join the conversation.

rond
Topic Author
Offline

07 Nov 2018 15:00 #71612 by rond

Replied by rond on topic MJX X601H

Still no luck with this model, have had so much rain lately I haven't messed with the drones

Please Log in or Create an account to join the conversation.

goebish
Offline
I Void Warranties

07 Nov 2018 16:16 - 07 Nov 2018 23:54 #71614 by goebish

Replied by goebish on topic MJX X601H

I suppose the X600H requires an extra flag to start motors compared to the X600.
I'll make a test build later where you can control individual bits manually, we may be able to find it like that if you do not have a logic analyzer.

Also try to set both sticks in the bottom corners, some quads can start motors like that.

Last edit: 07 Nov 2018 23:54 by goebish.

Please Log in or Create an account to join the conversation.