Jumper t8sg v2 plus no power on

Start
Prev
1
Next
End

mangmeephol
Topic Author
Offline

11 Jan 2019 07:49 - 11 Jan 2019 07:53 #72274 by mangmeephol

Jumper t8sg v2 plus no power on was created by mangmeephol

Help me my new jumper t8sg v2 plus press power bottom red LED show only one. Other no work monitor no show. If no press power bottom red LED no show help me please.

Last edit: 11 Jan 2019 07:53 by mangmeephol.

Please Log in or Create an account to join the conversation.

vlad_vy
Offline

11 Jan 2019 09:05 #72276 by vlad_vy

Replied by vlad_vy on topic Jumper t8sg v2 plus no power on

Try to check filesystem (USB mode), press ENT + short press Power On button. Most likely your filesystem damaged. If you can access filesystem, try to format USB drive and rewrite filesystem from any t8sg_v2_plus firmware archive.

www.deviationtx.com/downloads-new/category/13-nightly-builds

Please Log in or Create an account to join the conversation.

mangmeephol
Topic Author
Offline

13 Jan 2019 03:22 #72306 by mangmeephol

Replied by mangmeephol on topic Jumper t8sg v2 plus no power on

ขอบคุณมากๆครับ ผมทำตามที่คุณแนะนำสำเร็จเรียบร้อยดีครับ ใช้งานได้แล้วครับ ขอบคุณ

Please Log in or Create an account to join the conversation.

Start
Prev
1
Next
End

Time to create page: 0.070 seconds