Jumper T8SG Lite Help - FIXED!!!!!

Yes I tried to update my new Jumper T8SG Lite and now...…….anyone have a file to share or a fix? I can get into DFU

Now "t8sg_v2" firmware has flash memory auto detect enabled (from 24 January nightly build), so I think it can be used as firmware for T8SG Light, with changed "hardware.ini".

;Only useful for transmitters with an after-market vibration motor
;enable-haptic=1
;
;switch_types: 3x4, 3x3, 3x2, 3x1, 2x8, 2x7, 2x6, 2x5, 2x4, 2x3, 2x2, 2x1, potx2, potx1
;May occur more than once if necessary.
;Add nostock if stock FMOD and HOLD switches have been removed.
extra-switches = nostock
extra-switches = 3x4
; extra-switches = 2x2
extra-switches = potx2
;
;button_types: trim-all, trim-(left|right)-(up|down|both)
;May occur more than once if necessary.
;extra-buttons=
;
[modules]
; there is no need to enable the cyrf6936 module unless
; it is wired to an alternate port. It is Enabled automatically otherwise
enable-cyrf6936 = 0
; has_pa-cyrf6936 = 1
; enable-a7105 = A13
; has_pa-a7105 = 1
enable-cc2500 = A14
has_pa-cc2500 = 1
; enable-nrf24l01 = A15
; has_pa-nrf24l01 = 1
; enable-multimod = A13

I uploaded the "deviation-t8sg_v2-v5.0.0-5db9084" firmware with changed "hardware.ini". with DfuSe USB upgrade , did not fix but let me go into USB mode. Computer said drive error. fix? I said yes, copied all files from the t8sg_V2 folder to the fixed drive and all is back to new!!!!!!!! Thank You!