Assigning / detecting trim switches

More
03 Oct 2015 10:48 #38377 by Fernandez
Assigning / detecting trim switches was created by Fernandez
I have a hard time to get the correct trim button assigned to the right channels on my 7e.
It would be great if under trims menu, you can just clik on the trim button and have it detected assigned.

Another option could be a check box, "default trims". Which assign all the trim buttons to the corresponding sticks as many users use the trims for correcting the stick next to it.

Please Log in or Create an account to join the conversation.

More
03 Oct 2015 14:48 - 03 Oct 2015 14:49 #38389 by mwm
Replied by mwm on topic Assigning / detecting trim switches
Please open tickets on the bug tracker (link in the main menu on the left) for these new features.

And the trims in a new model are already defined to the sticks they are normally used with. If that's not what you're getting, then something else is broken.

Do not ask me questions via PM. Ask in the forums, where I'll answer if I can.

My remotely piloted vehicle ("drone") is a yacht.
Last edit: 03 Oct 2015 14:49 by mwm.

Please Log in or Create an account to join the conversation.

More
12 Oct 2015 00:23 #38751 by Hot_Wheels
Replied by Hot_Wheels on topic Assigning / detecting trim switches
I think I'm experiencing this issue with my devo 8, I have no trim screens when I upgraded to 4.0.1

Please Log in or Create an account to join the conversation.

Time to create page: 0.032 seconds
Powered by Kunena Forum