Devo 12s 3in1 / 4in1 RF module neat installation.

joeblack
Offline

19 Oct 2016 08:08 #55128 by joeblack

Replied by joeblack on topic 3in1 / 4in1 RF module

Would also like to buy a 4in1 module for my DEVO10.
I´m from Austria/Europe and TAOBAO doesn´t ship there.
My Question:
is there a way to buy such a 4in1 Modul for me now or do i have to wait until it´s available at Banggood or Aliexpress.....

.

thanks in advance
joe

Please Log in or Create an account to join the conversation.

ajtank
Offline

19 Oct 2016 08:41 #55131 by ajtank

Replied by ajtank on topic 3in1 / 4in1 RF module

It seems the other fellows used an agent called Taobao Focus to buy the module from China.

Please Log in or Create an account to join the conversation.

DaveyP
Offline

19 Oct 2016 10:57 #55132 by DaveyP

Replied by DaveyP on topic 3in1 / 4in1 RF module

Check my post (and others) www.deviationtx.com/forum/7-development/...dule?start=860#54118

As ajtank suggests, use Taobao Focus to do the transaction for you.. they even send pictures of the item so you can check it before they dispatch.

Please Log in or Create an account to join the conversation.

epilot
Offline

19 Oct 2016 12:54 #55142 by epilot

Replied by epilot on topic 3in1 / 4in1 RF module

The module is available on Banggood now.

4in1 module

Please Log in or Create an account to join the conversation.

Elmtree
Offline

19 Oct 2016 13:59 #55143 by Elmtree

Replied by Elmtree on topic 3in1 / 4in1 RF module

I installed my 4in1 module, but I'm not sure if I need to enable the amps in the hardware.ini. Do I?

Thanks

Please Log in or Create an account to join the conversation.

raketemensch
Offline

19 Oct 2016 14:32 #55147 by raketemensch

Replied by raketemensch on topic 3in1 / 4in1 RF module

epilot wrote: The module is available on Banggood now.

4in1 module

Is this the new drop-in module? If so, I guess it needs a little soldering on the 7e, but I haven't seen a guide for it yet. I'd love to pick this up, but I'm not sure if I'd be capable of installing it yet.

Please Log in or Create an account to join the conversation.

victzh
Offline

19 Oct 2016 15:02 #55148 by victzh

Replied by victzh on topic 3in1 / 4in1 RF module

This "drop-in" module still requires soldering even in Devo 10. The small 3 position connection point should be soldered as shown on one of the pictures on Banggood.

Please Log in or Create an account to join the conversation.

ds864
Offline

19 Oct 2016 15:04 - 19 Oct 2016 15:13 #55149 by ds864

Replied by ds864 on topic 3in1 / 4in1 RF module

Yes me too. The picture on the site looks like the Devo 10.
I've been looking at this ( www.hacksmods.com/category/devo/ ) to see how to do each module but the 4 in 1 sounds like a better move. I just need some step-by-step instructions for the Devo 7e if this is compatible?

Do you have to remove the existing module? Will this then have a better range than the stock module?

Last edit: 19 Oct 2016 15:13 by ds864.

Please Log in or Create an account to join the conversation.

hexfet
Offline

19 Oct 2016 15:28 #55150 by hexfet

Replied by hexfet on topic 3in1 / 4in1 RF module

Elmtree wrote: I installed my 4in1 module, but I'm not sure if I need to enable the amps in the hardware.ini. Do I?

Thanks

Yes, enable the pa for all.

Please Log in or Create an account to join the conversation.

Fer
Offline

19 Oct 2016 15:44 - 19 Oct 2016 15:44 #55151 by Fer

Replied by Fer on topic 3in1 / 4in1 RF module

At last. It is available in Banggood. Of course i have already purchased mine (at a price of 55 euros with all the commisions and fees for the agent), but it is good to know that banggood now offers this module.

Until a better option appears, that solves the LNA problem with a hardware fix, this is the best option so far for DEVO 10 users.

Last edit: 19 Oct 2016 15:44 by Fer.

Please Log in or Create an account to join the conversation.

victzh
Offline

19 Oct 2016 15:46 #55152 by victzh

Replied by victzh on topic 3in1 / 4in1 RF module

@ds864 - for installing 4-in-1 you need to remove existing module because 4-in-1 has CYRF6936 as well. It will have better range because it has PA - Power Amplifier - and though stock module has it also it is artificially limited.

Please Log in or Create an account to join the conversation.

ajtank
Offline

19 Oct 2016 15:55 #55154 by ajtank

Replied by ajtank on topic 3in1 / 4in1 RF module

raketemensch wrote:
epilot wrote: The module is available on Banggood now.

4in1 module

Is this the new drop-in module? If so, I guess it needs a little soldering on the 7e, but I haven't seen a guide for it yet. I'd love to pick this up, but I'm not sure if I'd be capable of installing it yet.

This module is mounted on a carrier board which is designed specifically for Devo 10. For Devo 7E you need to get the module without the carrier board

For 7E it seems the 3-in-1 is more appropriate.

Please Log in or Create an account to join the conversation.

victzh
Offline

19 Oct 2016 16:05 #55155 by victzh

Replied by victzh on topic 3in1 / 4in1 RF module

3-in-1 still has problems with protocols using receiving part of RF - either telemetry or with auto-acknowledge. Today 4-in-1 is the best module to install despite higher cost. Devo 10 specific module is also suitable for 7E, there are instructions for this here (thanks, HappyHarry) www.deviationtx.com/forum/how-to/5955-7e...-4in1?start=20#50816

Please Log in or Create an account to join the conversation.

HappyHarry
Offline

19 Oct 2016 16:08 #55156 by HappyHarry

Replied by HappyHarry on topic 3in1 / 4in1 RF module

ds864 wrote: Yes me too. The picture on the site looks like the Devo 10.
I've been looking at this ( www.hacksmods.com/category/devo/ ) to see how to do each module but the 4 in 1 sounds like a better move. I just need some step-by-step instructions for the Devo 7e if this is compatible?

Do you have to remove the existing module? Will this then have a better range than the stock module?

devo 4in1 fitting guide to the 7e is availabe here >> www.deviationtx.com/forum/how-to/5955-7e...he-devo-version-4in1

Please Log in or Create an account to join the conversation.

vlad_vy
Offline

19 Oct 2016 16:25 - 06 Mar 2017 06:04 #55157 by vlad_vy

Replied by vlad_vy on topic 3in1 / 4in1 RF module

Summary of module connections (3 wires) (Devo 6, Devo 7e, Devo 10, Devo 8, Devo F12E, Devo 12):

7105 = TMS pad (A13)
2500 = TCK pad (A14)
2401 = ???

4in1 module pinout

Devo6

2401 = C10

hardware.ini

;Only useful for transmitters with an after-market vibration motor
;enable-haptic=1
;
;switch_types: 3x2, 3x1, 2x2
;extra-switches=
;
[modules]
; there is no need to enable the cyrf6936 module unless
; it is wired to an alternate port. It is Enabled automatically otherwise
enable-cyrf6936 = B12
has_pa-cyrf6936 = 1
enable-a7105 = A13
has_pa-a7105 = 1
enable-cc2500 = A14
has_pa-cc2500 = 1
enable-nrf24l01 = C10
has_pa-nrf24l01 = 1
; enable-multimod = A13

Devo7e

2401 = A15

hardware.ini

;Only useful for transmitters with an after-market vibration motor
;enable-haptic=1
;
;switch_types: 3x2, 3x1, 2x2
;extra-switches=
;
;button_types: trim-all, trim-(left|right)-(up|down|both)
;May occur more than once if necessary.
;extra-buttons=
;
[modules]
; there is no need to enable the cyrf6936 module unless
; it is wired to an alternate port. It is Enabled automatically otherwise
  enable-cyrf6936 = B12
  has_pa-cyrf6936 = 0
  enable-a7105    = A13
  has_pa-a7105    = 1
  enable-cc2500   = A14
  has_pa-cc2500   = 1
  enable-nrf24l01 = A15
  has_pa-nrf24l01 = 1
; enable-multimod = A13

Devo10

2401 = B7

hardware.ini

;Only useful for transmitters with an after-market vibration motor
;enable-haptic=1
;
;switch_types: 3x2, 3x1, 2x2
;extra-switches=
;
[modules]
; there is no need to enable the cyrf6936 module unless
; it is wired to an alternate port. It is Enabled automatically otherwise
enable-cyrf6936 = B12
has_pa-cyrf6936 = 1
enable-a7105 = A13
has_pa-a7105 = 1
enable-cc2500 = A14
has_pa-cc2500 = 1
enable-nrf24l01 = B7
has_pa-nrf24l01 = 1
; enable-multimod = A13

Devo8, Devo F12E (PCB looks slightly different but MCU and pin are the same)

2401 = B3

hardware.ini

;Only useful for transmitters with an after-market vibration motor
;enable-haptic=1
;
;switch_types: 3x2, 3x1, 2x2
;extra-switches=
;
[modules]
; there is no need to enable the cyrf6936 module unless
; it is wired to an alternate port. It is Enabled automatically otherwise
enable-cyrf6936 = B12
has_pa-cyrf6936 = 1
enable-a7105 = A13
has_pa-a7105 = 1
enable-cc2500 = A14
has_pa-cc2500 = 1
enable-nrf24l01 = B3
has_pa-nrf24l01 = 1
; enable-multimod = A13

Devo12

2401 = B3

hardware.ini

;Only useful for transmitters with an after-market vibration motor
;enable-haptic=1
;
;switch_types: 3x2, 3x1, 2x2
;extra-switches=
;
[modules]
; there is no need to enable the cyrf6936 module unless
; it is wired to an alternate port. It is Enabled automatically otherwise
enable-cyrf6936 = B12
has_pa-cyrf6936 = 1
enable-a7105 = A13
has_pa-a7105 = 1
enable-cc2500 = A14
has_pa-cc2500 = 1
enable-nrf24l01 = B3
has_pa-nrf24l01 = 1
; enable-multimod = A13

Last edit: 06 Mar 2017 06:04 by vlad_vy.

Please Log in or Create an account to join the conversation.

ds864
Offline

20 Oct 2016 07:37 #55181 by ds864

Replied by ds864 on topic 3in1 / 4in1 RF module

Thanks for the help on this it still looks like a lot of work fitting the 4-in-1 into a 7e. I kind of like the idea of the 3-in-1 as I won't be touching the original module. This way if it all goes wrong I still have that module working (no worse off). But what are the issues with the 3-in-1 you mention?

Please Log in or Create an account to join the conversation.

vlad_vy
Offline

20 Oct 2016 08:48 #55182 by vlad_vy

Replied by vlad_vy on topic 3in1 / 4in1 RF module

I'm not sure, but it looks like 3in1 has problem with LNA for A7105 and nRF24L01 chips.

Please Log in or Create an account to join the conversation.

justyn07
Offline

20 Oct 2016 13:59 #55190 by justyn07

Replied by justyn07 on topic 3in1 / 4in1 RF module

i just order a 4 in 1 module from banggood and i never done the hardware ini. do you just copy paste the ini.

Please Log in or Create an account to join the conversation.

vlad_vy
Offline

20 Oct 2016 14:25 #55191 by vlad_vy

Replied by vlad_vy on topic 3in1 / 4in1 RF module

You need UNIX style editor to edit *.ini files. For example, "Notepad+".

Please Log in or Create an account to join the conversation.

justyn07
Offline

20 Oct 2016 15:24 #55195 by justyn07

Replied by justyn07 on topic 3in1 / 4in1 RF module

thank you. i have notepad+.

Please Log in or Create an account to join the conversation.

Time to create page: 0.262 seconds

Force desktop display

Devo 12s 3in1 / 4in1 RF module neat installation.

Attachments: