- Posts: 1433
Devo8 with vibration (updated for deviation 4.0.1)
- rbe2012
-
Topic Author
- Offline
- So much to do, so little time...
Less
More
26 Mar 2013 15:54 - 20 Jan 2014 13:34 #8113
by rbe2012
Devo8 with vibration (updated for deviation 4.0.1) was created by rbe2012
EDIT: new version based on deviation 3.0.0 4.0.1
This build needs a hardware mod described here .To use it you have to set manually a parameter "has_vibration=1" in the tx.ini file (after having done the mod, for sure). (Edit: not longer necessary)
It does not work for the Devo12 because the used output pin is in use there.
In the tx config there is a new option to switch vibration on or off (sets parameter in tx.ini accordingly).
EDIT:
Build for Deviation 3: see next post.
2nd EDIT:
Build for Deviation 4.0.1 attached here (unzip and flash). You will find a button on the third tx config page where you can switch vibrating off or on and test it (by pressing the button).
This build needs a hardware mod described here .
It does not work for the Devo12 because the used output pin is in use there.
In the tx config there is a new option to switch vibration on or off (sets parameter in tx.ini accordingly).
EDIT:
Build for Deviation 3: see next post.
2nd EDIT:
Build for Deviation 4.0.1 attached here (unzip and flash). You will find a button on the third tx config page where you can switch vibrating off or on and test it (by pressing the button).
Last edit: 20 Jan 2014 13:34 by rbe2012.
Please Log in or Create an account to join the conversation.
- rbe2012
-
- Offline
- So much to do, so little time...
Less
More
- Posts: 1433
08 Apr 2013 18:38 #8756
by rbe2012
Replied by rbe2012 on topic Devo8 with vibration (updated for deviation 3.0)
Corrected an error in initializing (if vibration was set off when the tx was switched on, it could only changed when the tx was switched off and on).
Here is the new version:
Here is the new version:
Please Log in or Create an account to join the conversation.
- RandMental
-
- Offline
Less
More
- Posts: 521
09 Apr 2013 19:26 - 09 Apr 2013 19:27 #8804
by RandMental
Replied by RandMental on topic Devo8 with vibration (updated for deviation 3.0)
Hi RBE
Do you have the V3 with vibration source somewhere in a repo where I can get it and try to make a patch file that I can apply when we build PB's latest V3.x.x source files?
Do you have the V3 with vibration source somewhere in a repo where I can get it and try to make a patch file that I can apply when we build PB's latest V3.x.x source files?
Last edit: 09 Apr 2013 19:27 by RandMental.
Please Log in or Create an account to join the conversation.
- rbe2012
-
- Offline
- So much to do, so little time...
Less
More
- Posts: 1433
10 Apr 2013 06:33 #8818
by rbe2012
Replied by rbe2012 on topic Devo8 with vibration (updated for deviation 3.0)
Yes, you can take it from my repo here:
rbe-vibrating
. I have sent PB a pull request (#55).
Please Log in or Create an account to join the conversation.
- RandMental
-
- Offline
Less
More
- Posts: 521
10 Apr 2013 14:32 #8827
by RandMental
Thanks!
Replied by RandMental on topic Devo8 with vibration (updated for deviation 3.0)
rbe2012 wrote: Yes, you can take it from my repo here: rbe-vibrating . I have sent PB a pull request (#55).
Thanks!
Please Log in or Create an account to join the conversation.
- crasy666
-
- Offline
Less
More
- Posts: 9
04 Jan 2014 22:06 #17951
by crasy666
Replied by crasy666 on topic Devo8 with vibration (updated for deviation 3.0)
Hello,
Will the vibration work on V4. Or can somebody make a build with the vibration mod on V4?
I like the vibration feature on my Devout 8S especially in the winter time with a transmitter glove, where you don't hear the buzzer too good
Thx in advance
Btw, I am using a vibration motor from a cell phone, works great and is designed for 3V so just a transistor BC548 a 100 Ohms resistor and a diode...
Will the vibration work on V4. Or can somebody make a build with the vibration mod on V4?
I like the vibration feature on my Devout 8S especially in the winter time with a transmitter glove, where you don't hear the buzzer too good
Thx in advance
Btw, I am using a vibration motor from a cell phone, works great and is designed for 3V so just a transistor BC548 a 100 Ohms resistor and a diode...
Please Log in or Create an account to join the conversation.
- -=Hubi-Dirk=-
-
- Offline
Less
More
- Posts: 209
05 Jan 2014 07:56 #17971
by -=Hubi-Dirk=-
Replied by -=Hubi-Dirk=- on topic Devo8 with vibration (updated for deviation 3.0)
Hi rbe2012,
would you be so kind and provide a version of the firmware 4.01 for the Devo 8s with the vibration feature?
Thanks in advance,
Dirk
would you be so kind and provide a version of the firmware 4.01 for the Devo 8s with the vibration feature?
Thanks in advance,
Dirk
Please Log in or Create an account to join the conversation.
- RandMental
-
- Offline
Less
More
- Posts: 521
05 Jan 2014 08:55 #17972
by RandMental
Replied by RandMental on topic Devo8 with vibration (updated for deviation 3.0)
Hi RBE,
I would also appreciate the AUX4/AUX5 and Vibration patch files for the latest V4.01
RM
I would also appreciate the AUX4/AUX5 and Vibration patch files for the latest V4.01
RM
Please Log in or Create an account to join the conversation.
- richardclli
-
- Offline
Less
More
- Posts: 199
06 Jan 2014 15:50 #18079
by richardclli
Replied by richardclli on topic Devo8 with vibration (updated for deviation 3.0)
I am about to work out the vibration mod as well. Any update on this?
Please Log in or Create an account to join the conversation.
- rbe2012
-
- Offline
- So much to do, so little time...
Less
More
- Posts: 1433
06 Jan 2014 16:08 #18080
by rbe2012
Replied by rbe2012 on topic Devo8 with vibration (updated for deviation 3.0)
Yep, I have seen your requests. I have lost it out of sight due to other priorities for a while, but I still have mounted the vibrating motor in my Devo8.
Time to get it rumbling!
Time to get it rumbling!
Please Log in or Create an account to join the conversation.
- rbe2012
-
- Offline
- So much to do, so little time...
Less
More
- Posts: 1433
06 Jan 2014 18:59 #18089
by rbe2012
Replied by rbe2012 on topic Devo8 with vibration (updated for deviation 3.0)
Ok, I have updated the first post with the new build. Attached here you can find the patch file (patch -p 1 -i diff_Vibration_4.0.1.txt).
Some gui elements have changed since 3.0 so I had to make it completely new, but there are only a few changes.
Some gui elements have changed since 3.0 so I had to make it completely new, but there are only a few changes.
Please Log in or Create an account to join the conversation.
- rbe2012
-
- Offline
- So much to do, so little time...
Less
More
- Posts: 1433
06 Jan 2014 19:15 #18092
by rbe2012
Do you thing it works now?
Have I provided a version for 3.0 or even 2.1.1? I don't remember.
I think I have lost what I have done before (since I did not find a patch file...). But I will surely be able to redo this.
Replied by rbe2012 on topic Devo8 with vibration (updated for deviation 3.0)
The last thing I herad from this AUX4/AUX5-mod was "let's have some testing" ...RandMental wrote: Hi RBE,
I would also appreciate the AUX4/AUX5 and Vibration patch files for the latest V4.01
RM
Do you thing it works now?
Have I provided a version for 3.0 or even 2.1.1? I don't remember.
I think I have lost what I have done before (since I did not find a patch file...). But I will surely be able to redo this.
Please Log in or Create an account to join the conversation.
- -=Hubi-Dirk=-
-
- Offline
Less
More
- Posts: 209
06 Jan 2014 19:23 #18093
by -=Hubi-Dirk=-
Replied by -=Hubi-Dirk=- on topic Devo8 with vibration (updated for deviation 3.0)
Hi rbe,
thank you very much for your work. I can no longer imagine the time with my the Devo 8s without vibration.
For those who still have not heard from this great Mod, follow this link:
deviationtx.com/forum/how-to/1501-Devo-8...vibration-motor#8710
thank you very much for your work. I can no longer imagine the time with my the Devo 8s without vibration.
For those who still have not heard from this great Mod, follow this link:
deviationtx.com/forum/how-to/1501-Devo-8...vibration-motor#8710
Please Log in or Create an account to join the conversation.
- rbe2012
-
- Offline
- So much to do, so little time...
Less
More
- Posts: 1433
06 Jan 2014 19:38 #18094
by rbe2012
Replied by rbe2012 on topic Devo8 with vibration (updated for deviation 3.0)
RandMental,
I sent you a PM with link to test-version.
I sent you a PM with link to test-version.
Please Log in or Create an account to join the conversation.
- crasy666
-
- Offline
Less
More
- Posts: 9
07 Jan 2014 20:20 #18158
by crasy666
Replied by crasy666 on topic Devo8 with vibration (updated for deviation 3.0)
Hi rbe,
Thank you so much, great job!
I have updated today my Devo 8S all including the vibration alarm is working great.
Regards
Thank you so much, great job!
I have updated today my Devo 8S all including the vibration alarm is working great.
Regards
Please Log in or Create an account to join the conversation.
- rbe2012
-
- Offline
- So much to do, so little time...
Less
More
- Posts: 1433
23 Jan 2014 10:05 #18982
by rbe2012
Replied by rbe2012 on topic Devo8 with vibration (updated for deviation 3.0)
Since adding a vibrating motor to a Devo8 is supported by the main deviation code in the actual nightlies no further patches are necessary.
AUX4/5 is not yet supported.
AUX4/5 is not yet supported.
Please Log in or Create an account to join the conversation.
Time to create page: 0.064 seconds
-
Home
-
Forum
-
Development
-
Builds
- Devo8 with vibration (updated for deviation 4.0.1)