Reference nightly build Deviation v5.x.x

Hello VLAD, Many thanks for your quick reply, I was installing the last build from your link above and there is still no voice or beeps on my Jumper T8sgPlus, I've editing all of the settings into the hardware.ini about "dfplayer" and also added the voice.ini into the media map. What can I do now? The external voicemodule works well as an independend device, I was testing it and it works fine independently so it cann't be the problem. The voice module is connected to the trainerport and the wiring is the same as before my Jumper was corrupt. . I use the RC Jumper T8sgPlus bought 1 month ago. Many thanks for any answere about my questions here and have a nice weekend!

Dear Vlad_VI, Many thanks for your reply, this is the whole content of my hardware.ini I've uploaded on to my T8sgPlus: Content

;Only useful for transmitters with an after-market vibration motor
;enable-haptic=1
;
;switch_types: 3x4, 3x3, 3x2, 3x1, 2x8, 2x7, 2x6, 2x5, 2x4, 2x3, 2x2, 2x1, potx2, potx1
;May occur more than once if necessary.
;Add nostock if stock FMOD and HOLD switches have been removed.
extra-switches = nostock
extra-switches = 3x4
extra-switches = 2x2
extra-switches = potx2
;
;Audio player connected to UART (Devo12/S internally, others via trainer port): audiofx, dfplayer
voice=dfplayer
;
;Enable if audio device is wired to uart5 instead of ppm on devo7e-256
voice-uart5=1
;
;button_types: trim-all, trim-(left|right)-(up|down|both)
;May occur more than once if necessary.
;extra-buttons=
;
[modules]
; there is no need to enable the cyrf6936 module unless
; it is wired to an alternate port. It is Enabled automatically otherwise
; enable-cyrf6936 = B12
; has_pa-cyrf6936 = 1
enable-a7105 = A13
has_pa-a7105 = 1
enable-cc2500 = A14
has_pa-cc2500 = 1
enable-nrf24l01 = A15
has_pa-nrf24l01 = 1
; enable-multimod = A13

End content

Now I was commenting by ; "voice-uart5=1" and it works for the voice module.
The beepsounds also doesn't work, no at starting up or quit the device by the on/off button. Any other idea plz.? Other readers and members of this list/topic must also answere to my request. I'm looking for the protocols for the Hubsan 502s and the MJX bugs 5W to control this drones with my T8sgPlus. . Many thanks in advance! Kind regards from Belgium! I.A.G.A.

Is there a way to track all wat is inside the nightlies? Next to extra protocols
Does it include latest CRSF and PXX, does it include the HEXFET updated reduced latency/jitter changes ?

at some point can we just make version 5.1?

Hi vlad I appreciate all your efforts and hard work and same for all developers here. But it seem you have to do lot of efforts to generate builds?
Is there not a neater way to make sure we have some kind of versioning system for test builds releases and to be able to give feedback? 5.0.1- 5.0.2 etc.
How do the do it with f.i. Betaflight project?
We do have lots of updates over 2 years

Would make reporting etc much easier? Also some improvements from developers may get lost/forgotten or stay untested somewhere, because nobody knows it excists.