Elevon mix help please

I have tried, I just cant get my head around it. I have been using er9x on the old turnigy 9x for a while now and thought I could grip deviation quite easy. I have been through the manual, through the v-tail mix & elevon setup on that post here, but I just cant get it right. That elevon ini file gave me the ele/ail sticks wrong way around - my trying to fix it screwed it up. Below is my current model setup I thought should work, elevator seems to work and stick movement to the left works, but stick movement to the right gets no response on the servos. This is specifically a simple normal elevon 2 servo flying wing setup, I haven't worried for throttle on it just yet that part is easy, I am pretty sure I am doing something classically simple wrong! Please would someone have a look and push me in the right direction. Agrh if I could just get the penny to drop its driving me crazy! expo and dual rates and the rest I can sort, I just cant get the darn elevon working first.

Hello, thank you, I did eventually work it all out and put a good template for an EleVon mix under templates with 3 way rates using the mix switch.

BTW, for an Elevator movement of the 2 control surfaces you would normally use either the outer sides of each servo arm ... servo 1 left side arm, servo 2 right side arm. (or 2 inner sides) to the control surface. For up (or down) movement of both control surfaces (elevator) the servo directions need to be different that both arms are pushing or both pulling - one servo clockwise, one anticlockwise, for aileron both servo's would move same direction, both clockwise or both anticlockwise, draw it, you will see

Servo reverse for Elevon mixing, I am not sure you follow what is an Elevon mix setup? Elevon is where only 2 servos move the only 2 control surfaces on a flying wing or similar - the 2 control surfaces must act as the elevator and also aileron at the same time. They are not only set for just elevator or only aileron, they must be mixed to perform both tasks simultaneously. This template works, with 3 levels of rates which affect the elevator/aileron at the same time, I have flown with this today.