- Posts: 41
MINI CP standard config for ver.3.0
- jvulte
-
Topic Author
- Offline
Less
More
09 Apr 2013 00:57 #8766
by jvulte
MINI CP standard config for ver.3.0 was created by jvulte
Here is a Standard setup for Ver 3.0, Walkera Mini CP config with Custom Wallpaper and colors.
Throttle hold,... Rud DR
Flight Mode,......Normal, Stunt 1, Stunt 2
Air DR ,..........Ail,and Ele, DR
Mix,..............Gyro Sens,.... 75%,70%,50%
All throttle and pitch curves set up to the book
Hope this helps someone out!
edit: scratch the custom colors,.. I would have to post my whole media dir for that, but here is a couple items to make it custom. Wallpaper,Icon,and Toggles.
Throttle hold,... Rud DR
Flight Mode,......Normal, Stunt 1, Stunt 2
Air DR ,..........Ail,and Ele, DR
Mix,..............Gyro Sens,.... 75%,70%,50%
All throttle and pitch curves set up to the book
Hope this helps someone out!
edit: scratch the custom colors,.. I would have to post my whole media dir for that, but here is a couple items to make it custom. Wallpaper,Icon,and Toggles.
- icxnews555
-
- Offline
Less
More
- Posts: 1
01 Oct 2013 05:45 #14186
by icxnews555
Replied by icxnews555 on topic MINI CP standard config for ver.3.0
Nice thank you.
- crave_07
-
- Offline
Less
More
- Posts: 14
11 Nov 2013 21:07 #15526
by crave_07
Replied by crave_07 on topic MINI CP standard config for ver.3.0
hi sir can put this in 7E for my min cp
Time to create page: 0.109 seconds
-
Home
-
Forum
-
Model Configs, Templates, Skins
-
Model Configs
- MINI CP standard config for ver.3.0