×

Notice

The forum is in read only mode.
  1. Forum
  3. Model Configs, Templates, Skins
  5. Model Configs
  7. V200D01 Devo version

V200D01 Devo version

More
22 Aug 2013 08:42 #13146 by tengarang
V200D01 Devo version was created by tengarang
Guys

have any of you tried to bind the version 3.0.0 firmware to the V200D01 Devo version? It comes with a 2402 Devo tx....today I tried with devo protocol and nothing works
More
22 Aug 2013 08:45 #13147 by FDR
Replied by FDR on topic V200D01 Devo version
Did you clean the Fixed ID value in the TX to bind automatically?
More
22 Aug 2013 09:24 #13148 by tengarang
Replied by tengarang on topic V200D01 Devo version
Mr FDR

thank you. No i have not and not sure how this is carried out
More
22 Aug 2013 09:43 - 22 Aug 2013 09:45 #13149 by FDR
Replied by FDR on topic V200D01 Devo version
On a DEVO 6/8/12: open the model setup page, click on the "Fixed ID" value, delete the value with the DEL button and press DONE.
Now you can use the "Re-Init" button to bind, or turn off and on the tx.

On a DEVO 7E/10: Menu -> Model menu -> Model setup -> go down to fixed id and open it with ENT -> delete the value with the DEL button and press DONE...


EDIT: Please leave the "Mr"! I'm not THAT FDR... ;)
Last edit: 22 Aug 2013 09:45 by FDR.
More
22 Aug 2013 16:20 #13164 by tengarang
Replied by tengarang on topic V200D01 Devo version
Thanks again FDR....well I knew you werent the real FDR lol thank you again
More
22 Aug 2013 17:46 #13165 by tengarang
Replied by tengarang on topic V200D01 Devo version
It worked thank you **Bows**
  1. Forum
  3. Model Configs, Templates, Skins
  5. Model Configs
  7. V200D01 Devo version
Time to create page: 0.081 seconds
Powered by Kunena Forum
Force desktop display