- Posts: 17
Pandora Warrior
- tengarang
- Topic Author
- Offline
Less
More
23 Aug 2013 08:32 - 23 Aug 2013 08:32 #13174
by tengarang
Pandora Warrior was created by tengarang
Guys I am giving some real serious thought about getting the pandora
would the 3.0.0 firmware be able to support?
8s version...devo protocol
would the 3.0.0 firmware be able to support?
8s version...devo protocol
Last edit: 23 Aug 2013 08:32 by tengarang.
Please Log in or Create an account to join the conversation.
- rbe2012
- Offline
- So much to do, so little time...
Less
More
- Posts: 1433
23 Aug 2013 10:12 #13177
by rbe2012
Replied by rbe2012 on topic Pandora Warrior
Why not? If it is controllable with F4/F7 it will be with deviation. Only the video can not be shown on the deviation supported tx (due to a lack of video receiver).
Please Log in or Create an account to join the conversation.
- tengarang
- Topic Author
- Offline
Less
More
- Posts: 17
23 Aug 2013 10:44 #13179
by tengarang
Replied by tengarang on topic Pandora Warrior
well thank you sir. I just ordered it, now I gotta figure out how to setup the radio...never dealt with multi rotors
Please Log in or Create an account to join the conversation.
- rbe2012
- Offline
- So much to do, so little time...
Less
More
- Posts: 1433
23 Aug 2013 11:50 #13180
by rbe2012
Replied by rbe2012 on topic Pandora Warrior
I have not seen a manual for the Pandora but I am quite sure that it will be controlled like a flybar 4-channel-heli. Setup should be easy.
If you encounter any problems, please don't be afraid to ask (assuming you have at least read the manual ).
If you encounter any problems, please don't be afraid to ask (assuming you have at least read the manual ).
Please Log in or Create an account to join the conversation.
- tengarang
- Topic Author
- Offline
Less
More
- Posts: 17
19 Jan 2021 09:43 #77193
by tengarang
Replied by tengarang on topic Pandora Warrior
Hi Guys,
I owe all of you an apology, been off the grid since 2013 due to complications with life. Back on my feet again which is a miracle. Will start actively participating in discussions. Its not typical of me to not respond to posts especially the ones that i started. WIll spam this message to all the threads i started, and hope you guys understand.
BEst wishes to all stay safe
Tengarang
I owe all of you an apology, been off the grid since 2013 due to complications with life. Back on my feet again which is a miracle. Will start actively participating in discussions. Its not typical of me to not respond to posts especially the ones that i started. WIll spam this message to all the threads i started, and hope you guys understand.
BEst wishes to all stay safe
Tengarang
Please Log in or Create an account to join the conversation.
- tengarang
- Topic Author
- Offline
Less
More
- Posts: 17
19 Jan 2021 09:44 #77194
by tengarang
THanks Rebe2012 some time has passed since you've replied, i appreciate your post. will check it out and get back to you when i get the opportunity
Replied by tengarang on topic Pandora Warrior
rbe2012 wrote: I have not seen a manual for the Pandora but I am quite sure that it will be controlled like a flybar 4-channel-heli. Setup should be easy.
If you encounter any problems, please don't be afraid to ask (assuming you have at least read the manual ).
THanks Rebe2012 some time has passed since you've replied, i appreciate your post. will check it out and get back to you when i get the opportunity
Please Log in or Create an account to join the conversation.
Time to create page: 0.039 seconds
- Home
- Forum
- Model Configs, Templates, Skins
- Model Configs
- Pandora Warrior