Align T-Rex 150

Hey guys,

I don't know how, but I was able to score a T-Rex 150 at my local hobby shop today. Presume I am one of the first but was hoping someone else was planning to use their 7E with this model.

Here is Align's great set up video - I have a DSMX satellite and the 7E - do you feel that I should be able to use the settings (e.g., 11MS frame rate) and bind using my 7E?

Align DSM2 / DSMX radio setup and bind procedure

Thanks,
Dave

The devo will bind to a DSMX at 11ms, that is what I am using on my TRex 500 clone with two satellites.

I thought deviation didnt support 11ms mode. How do you know its not 22ms mode?

Hexperience wrote: I thought deviation didnt support 11ms mode. How do you know its not 22ms mode?

To be honest I can't tell from the devo, but I set up the mini vBar to 11ms DSMX Satellites and it's working.

DSMx 11ms high speed test build: www.deviationtx.com/forum/protocol-devel...pported-or-not#54325

I know this is an old topic but for anyone looking for compatibility with this bird on the devo 10,
installed CC2500 module from banggood with latest vlads build, no freq tuning needed on mine for binding with S-FHSS Protocol. seems to respond better than with DSMX protocol and satellite.
all DR and TH-H operational.

im attaching my model file.


AIL and ELE DR0 50 w +30EXP, DR1 100/ LIN

Normal, idle 1 and 2 as per align manual, throttle safety at -100, and RUD1 Throttle -100 and pitch hold at 0 degrees.

the 150x GRS is nice because the deviation values match, GRS values are -100 to +100. always calibrate when you change tx settings in app and do it with throttle hold off.

Hi Danker16,

Thanks for sharing. I fly the Trex 150 x with the DEVO 6s.

Dieter