DJI F550 / DEVO10 / Naza-M Lite

More
02 Mar 2014 08:46 #21069 by Bullfrog
DJI F550 / DEVO10 / Naza-M Lite was created by Bullfrog
Here is a config file for DJI F550 Hexacopter. Configuration: DJI F550 / Devo10 with FW 4.0.1 / Naza-M Lite + GPS. I think it will run with Naza-M V2 as well.
Supports all flight modes and fail-save/comming-home. Also switchable scales for ELEV/AILE.
Maybe the values for Flight-Mode, Orienting-Control and Fail-Save need some readjustment caused in variations of the different RX-Modules.
Details in attached document.
Attachments:

Please Log in or Create an account to join the conversation.

More
23 Mar 2014 01:20 #21742 by mahandel
Replied by mahandel on topic DJI F550 / DEVO10 / Naza-M Lite
hi! i am completely new to deviation and even having a tx at all!
i just got an F550 / naza v2 with a devo 10 and used your settings above...
it works like a charm!!!!!!! many many thanks to you and all the others developing the deviation FW and models :)

[Devo-10 @ DJI Flamewheel F550 with GoPro3+]

Please Log in or Create an account to join the conversation.

More
29 Mar 2014 07:27 #21930 by Bullfrog
Replied by Bullfrog on topic DJI F550 / DEVO10 / Naza-M Lite
So the file also works with Naza V2, thank you for this information.
The file works with all models form DJI Flamewheel series: F330/450/550, only different settings in Naza Configuration necessary. Info´s added to the Setup file.
Attachments:

Please Log in or Create an account to join the conversation.

More
05 Apr 2014 08:04 - 05 Apr 2014 08:08 #22143 by drahdiwaberl
Replied by drahdiwaberl on topic DJI F550 / DEVO10 / Naza-M Lite
would be interesting to know which receiver/protocol is used with this.

thanks.

(ok, it's in the pdf.. for others: it's an RX1002, so walkera protocol)
Last edit: 05 Apr 2014 08:08 by drahdiwaberl.

Please Log in or Create an account to join the conversation.

More
07 Apr 2014 22:53 #22220 by tokenter
Replied by tokenter on topic DJI F550 / DEVO10 / Naza-M Lite
Thank you Bullfrog.

Do i have to redo the esc transmitter calibration after changing model config?

Please Log in or Create an account to join the conversation.

More
08 Apr 2014 00:31 #22225 by Hot_Wheels
Replied by Hot_Wheels on topic DJI F550 / DEVO10 / Naza-M Lite
Will this set up work on devo 8?

Please Log in or Create an account to join the conversation.

More
19 Apr 2014 10:01 #22567 by mahandel
Replied by mahandel on topic DJI F550 / DEVO10 / Naza-M Lite
OH NO!!!! I messed it up :(

everything was fine (using your config) until yesterday:
I installed the gimbal (zenmuse H3 2D at F550) and it immediately moved to a position pointing to the ground.

Then I tried to configure AUX4 or AUX5 to move the gimbal but as a complete newbee I was not able to configure it :unsure:

Then I realized that in the NAZA M-V2 configuration tool the switches are wrong: GPS/atti. mode is no longer working and Home Lock neither!!! :sick:

I tried it with a copy of your config (like it worked before!) but no success!

PLEASE HELP ME anyone! It's easter holidays and I finaly have time and the GoPro... and now I cannot fly :blink:

my setup:
F550 with Naza M-V2, Zenmuse H3 2D with GoPro
Devo-10 with RX1002

[Devo-10 @ DJI Flamewheel F550 with GoPro3+]

Please Log in or Create an account to join the conversation.

More
19 Apr 2014 14:12 #22570 by Bullfrog
Replied by Bullfrog on topic DJI F550 / DEVO10 / Naza-M Lite
Check the wiring between RX and NAZA:

RX AUX1 (CH6) > Naza Connector U (Flight Control Mode)
RX AUX2 (CH7) > Naza Connector X2 (Orientation Control)

Please Log in or Create an account to join the conversation.

More
19 Apr 2014 16:04 - 19 Apr 2014 16:06 #22573 by mahandel
Replied by mahandel on topic DJI F550 / DEVO10 / Naza-M Lite
ok - I checked the wiring and in fact - it was a little different :blush:
...but unfortunately it didn't work after the change either.

now I have the following wiring:
Naza -> RX1002:
A -> A
E -> E
T -> T
R -> R
G (Gear is empty)
U -> AUX1
X2 -> AUX2
X1 -> AUX3 (is this channel 8??)
X3 -> (connected to Naza PMU)

and it works with the GPS/atti mode and IOC again :silly:

The gimbal is pointing forward - at least I can fly and use the GoPro!
now I assigned Channel 8 (see above - connected to Naza X1) to AUX4: Simple - 1to1... hoping that I can control the gimbal with AUX4.

But this does not work so far :dry:
do you have any idea how to assign AUX4 to the gimbla control?

btw: in the Naza tool I did NOT check the Gimbal Switch ON!! (someone told me this is not necessary for the zenmuse gimbal?)
Do I have to change the settings in the Naza tool? or is it possible to use the tilt function without?

attached my model2.ini ...

[Devo-10 @ DJI Flamewheel F550 with GoPro3+]
Attachments:
Last edit: 19 Apr 2014 16:06 by mahandel.

Please Log in or Create an account to join the conversation.

More
19 Apr 2014 16:55 - 19 Apr 2014 16:57 #22576 by Bullfrog
Replied by Bullfrog on topic DJI F550 / DEVO10 / Naza-M Lite
Attached a new config file:
- Max. channels set to 10
- TX AUX4 assigned to CH8 (RX AUX3)
- TX AUX5 assinged to CH9 (RX AUX4)

Wiring: RX AUX3 (CH8) > Naza Connector X1 (Gimbal/Gain Control)

Mixer of AUX4/5 is set to simple 1-to-1, I cannot check if it works properly because of no gimble but give it a try.

Channel monitor on my TX give me erratic values when turning AUX4/5, not sure if it is a malfuncion of my TX or a bug in Dev. 4.0.1.
Attachments:
Last edit: 19 Apr 2014 16:57 by Bullfrog.

Please Log in or Create an account to join the conversation.

More
19 Apr 2014 19:28 #22577 by mahandel
Replied by mahandel on topic DJI F550 / DEVO10 / Naza-M Lite
hi again - thank you, but it does not work :S

I experimented with your model.ini and different kinds of settings but could not get AUX4 or AUX5 to be working.

If I set Channel 8 to any of the sticks, I can move the camera (X1) with the stick (but at the same time the F550 would turn around or fly into the given direction :lol: ) - so it is wired correctely!
But as soon as I choose AUX, no signal seems to be coming from the Devo.
I tried simple, complex, 1to1... no reaction on the monitor!!

Maybe there is a generic misunderstanding in using the 2 AUX knobs??
Can someone please help? :P

[Devo-10 @ DJI Flamewheel F550 with GoPro3+]

Please Log in or Create an account to join the conversation.

More
19 Apr 2014 20:26 #22581 by mahandel
Replied by mahandel on topic DJI F550 / DEVO10 / Naza-M Lite
YYYYEEEEHHHHAAAA!!!! got it!!

after setting TRIM and recalibrating, it works!!
AUX5 (on channel 8) is now moooooving my gimbal!

(seems the last time(s) I did recalibrate the STICKS I did NOT turn the knobs :evil: )

I'll attach my FINAL model.ini for all who want to use it! :lol:

@Bullfrog: thank you for your help!

[Devo-10 @ DJI Flamewheel F550 with GoPro3+]
Attachments:

Please Log in or Create an account to join the conversation.

More
16 May 2014 14:40 #23282 by oldgamefreak
Replied by oldgamefreak on topic DJI F550 / DEVO10 / Naza-M Lite
WooHoo thanks for this guys!!! Getting my first NAZA V1 550 next week. looking forward to being able to use this :cheer:

Please Log in or Create an account to join the conversation.

More
18 May 2014 20:21 #23321 by Bullfrog
Replied by Bullfrog on topic DJI F550 / DEVO10 / Naza-M Lite
Hello

Here are my latest files for DJI F-Series.

TX AUX4/5 assigned to RX for Gain/Gimbal control, values will be shown in display now.

Added a "General" section in Info file and did some minor fixes.
Attachments:

Please Log in or Create an account to join the conversation.

More
20 May 2014 18:22 #23410 by RRaider
Replied by RRaider on topic DJI F550 / DEVO10 / Naza-M Lite
Will this work with an 8S and an RX802 receiver? I have an f450 kit on the way and want to make sure I have everything I need to get it in the air.

Thanks

Please Log in or Create an account to join the conversation.

More
22 May 2014 23:03 #23509 by oldgamefreak
Replied by oldgamefreak on topic DJI F550 / DEVO10 / Naza-M Lite
Thank you all for this. Getting my 550 today or tomorrow. Do any of you have a HEX model icon? I don't want to look at a getto helicopter while i'm flying my cool 550 :P

Please Log in or Create an account to join the conversation.

More
17 Jun 2014 18:13 #24126 by Dann6968
Replied by Dann6968 on topic DJI F550 / DEVO10 / Naza-M Lite
This has been super helpful. Thanks so much.

Only question I have is how can I reverse the fmod switch. Currently it's manual-0, ATT-1, and GPS-2. I would like it the other way around. Had a couple crashes from accidentally switching it into manual mode when I meant to go into reverse.

Thanks again.

Please Log in or Create an account to join the conversation.

More
18 Jun 2014 11:32 #24134 by mahandel
Replied by mahandel on topic DJI F550 / DEVO10 / Naza-M Lite
don't know how to reverse it, but to avoid crashing in manual mode I simply set the switch to "atti" instead of "manual" in Naza config :)

ATT-0, ATT-1, GPS-2 (rather losing a feature than a copter)

[Devo-10 @ DJI Flamewheel F550 with GoPro3+]

Please Log in or Create an account to join the conversation.

More
18 Jun 2014 18:29 #24147 by Bullfrog
Replied by Bullfrog on topic DJI F550 / DEVO10 / Naza-M Lite
Hi Dann6968

This file is with FMOD Reverse.

I´ve no time to test it but give it a try.
Attachments:

Please Log in or Create an account to join the conversation.

More
24 Mar 2015 12:23 #30177 by Caroga
Replied by Caroga on topic DJI F550 / DEVO10 / Naza-M Lite
Hi,
Thank you very much for your time and effort for making this as easy as possible for others.

I've implemented your config and it works like a charm. I didn't knew all the switches so I looked it up and thought maybe someone else could benefit from what I've found:


I didn't knew what the RUDD D/R was. Found it!

I am confused about the TX Power Off / Signal lost setting. I've tried it a few times but it doesn't seem to work. I just disabled my transmitter mid flight, not that good of an idea honestly. Any thoughts on what I may be doing wrong ?
I was flying GPS mode.

Kind regards!
Attachments:

Please Log in or Create an account to join the conversation.

Time to create page: 0.072 seconds
Powered by Kunena Forum