Devo 7e configs for Hubsan X4

More
14 Mar 2014 06:29 - 14 Mar 2014 13:02 #21534 by droople
Devo 7e configs for Hubsan X4 was created by droople
Hi there
I'm trying to configure my Devo 7e to control Hubsan X4.

I'm using left hand mode 2
I found that the Rudd and Thro work fine,but Aile and Elev didn't work in the way I want.

Currently, the Elev controls the rolling leftward and rightward, and Aile controls the forward and backward. It's the opposite way I want.

Could anyone tell me how to swap the control between Aile and Elev?

Thanks a lot.
Last edit: 14 Mar 2014 13:02 by droople. Reason: confused with Elev and Aile

Please Log in or Create an account to join the conversation.

More
14 Mar 2014 08:09 #21536 by musons
Replied by musons on topic Devo 7e configs for Hubsan X4

droople wrote: Hi there
I'm trying to configure my Devo 7e to control Hubsan X4.

I'm using left hand mode 2
I found that the Rudd and Thro work fine,but Aile and Elev didn't work in the way I want.

Currently, the Aile controls the rolling leftward and rightward, and Elev controls the forward and backward. It's the opposite way I want.

Could anyone tell me how to swap the control between Aile and Elev?

Thanks a lot.


I see two ways:
1. open modelXX.ini file with Notepad++ but never with MS Notepad and change channel1 to channel2, also ch1 to ch2 and vice versa in every place you find them in .ini file
2. open mixer window on TX and change channel function (use Deviation manual)

Please Log in or Create an account to join the conversation.

More
14 Mar 2014 09:06 #21538 by linux-user
Replied by linux-user on topic Devo 7e configs for Hubsan X4

musons wrote:

droople wrote: Hi there
I'm trying to configure my Devo 7e to control Hubsan X4.

I'm using left hand mode 2
I found that the Rudd and Thro work fine,but Aile and Elev didn't work in the way I want.

Currently, the Aile controls the rolling leftward and rightward, and Elev controls the forward and backward. It's the opposite way I want.

Could anyone tell me how to swap the control between Aile and Elev?

Thanks a lot.


I see two ways:
1. open modelXX.ini file with Notepad++ but never with MS Notepad and change channel1 to channel2, also ch1 to ch2 and vice versa in every place you find them in .ini file
2. open mixer window on TX and change channel function (use Deviation manual)


Are you sure you want to exchange AIL and ELE?

Currently, the Aile controls the rolling leftward and rightward, and Elev controls the forward and backward.

That doesn't sound wrong.
I would change the direction of the AIL and ELE channels.

Please Log in or Create an account to join the conversation.

More
14 Mar 2014 13:02 #21541 by droople
Replied by droople on topic Devo 7e configs for Hubsan X4
sorry, I'm confused with Aile and Elev as English is not my first language.

What happened is the Elev controls the rolling leftward and rightward, and Aile controls the forward and backward. And I want to correct it.

Please Log in or Create an account to join the conversation.

Time to create page: 0.034 seconds
Powered by Kunena Forum