JJRC 1000A Quadcopter (V202)

Hi, see below for a JJRC 1000A model file.

The model name will be "JJIRC POLY", you can change to your particular needs.

This is using the "Hubsan X4 for 7e 10" icon located at:

http://www.deviationtx.com/forum/bw-icons-for-devo-7e-10/1615-hubsan-x4-for-7e-10

Requires the NRF24L01 module:

http://www.banggood.com/DEVO-Transmitter-Tuner-Modified-For-FBL80-FBL100-WLtoys-V922-p-89812.html

Here is a direct link to the board:

http://www.banggood.com/JJRC-1000A-RC-Quadcopter-Part-Receiver-Board-1000A02-p-928365.html

And a direct link to the BNF quad:

http://www.banggood.com/JJRC-1000A-24G-6-Axis-Gyro-RC-Quadcopter-BNF-p-926458.html

Thank you. This was a big help.

I find this radio/protocol pair works for a micro quadcopter I have labeled

WLtoys NO.V282 SKYLARK
incredible nano-sized r/c quadcopter

It came in a handsome retail box, too. Anyway I mention it here in case another searches these pages trying to do the same thing!

Here's mine which is a modified from above with auto flip. The file comes out of Devo 8S. Some notable controls:

Channel 5 controls the LEDs, it is mapped to GEAR 0 = ON, GEAR 1 = OFF
Channel 6 controls the auto-flip, it is mapped to RUDD D/R 0 = OFF (no flip), RUDD D/R 1 = ON (auto flip)
FMODE 0 = 60% AIL and ELE
FMODE 1 = 80% AIL and ELE
FMODE 2 = 100% AIL and ELE

Auto Flip works at FMODE 2 (100%) and RUDD DR/R 1, at this setting if you give full right stick movement the quad will flip in that direction. Pretty cool. I like this setting so far.

From what I've read the 1000A has headless mode. What channel is used to activate headless mode tho? Any suggestions?

Thanks

Zaphod wrote: From what I've read the 1000A has headless mode. What channel is used to activate headless mode tho? Any suggestions?

Thanks

Check this thread below: JJRC1000 questions
Look for the posting by Racemaniac. He has a model file and data about what controls what.

Headless mode is assigned to channel 9.

Thanks guys! Very much appreciated

Hi all,
Jjrc 1000 ( old, without A ) does not supported by Deviation?
Can't bind ...

staryk wrote: Hi all,
Jjrc 1000 ( old, without A ) does not supported by Deviation?
Can't bind ...

The JJRC JJ-1000 is not supported in the Deviation v4.0.1 released version, but is supported by the Nightly Builds. Flash a recent Nightly Build firmware, round up a model config/ini file for the JJ-1000, and all will be good.

Is anybody experiencing weird control in headless mode? On mine when in headless mode if i push forward the quad moves forward and to the right like i am pushing the stick to the top right corner..Any ideas whats going on anybody?

peanut_man wrote: Here's mine which is a modified from above with auto flip. The file comes out of Devo 8S. Some notable controls:

Channel 5 controls the LEDs, it is mapped to GEAR 0 = ON, GEAR 1 = OFF
Channel 6 controls the auto-flip, it is mapped to RUDD D/R 0 = OFF (no flip), RUDD D/R 1 = ON (auto flip)
FMODE 0 = 60% AIL and ELE
FMODE 1 = 80% AIL and ELE
FMODE 2 = 100% AIL and ELE

Auto Flip works at FMODE 2 (100%) and RUDD DR/R 1, at this setting if you give full right stick movement the quad will flip in that direction. Pretty cool. I like this setting so far.

Hello is it possible to change my jjrc x1 file for Devo 7e as your but in pheasants so that only fmod0 and fmod1 be used fmod0 clearance to 100% and 60% fmod1 if you like it.

I've been flying a modified JJRC JJ1000 quad for quite some time now. In fact I have a few of them with graphite bodies. I'm brand new to open TX but just bought a Radio Master TX 16S to want to know if anybody's got a download to make the JJ1000 work with the radio master TX16 radio.