My model file for Lizard95 with Devo7e (without modification).
- Protocol : DSMX
- Hold (Ch5) : In bF, I configure this channel for Arming/Disarming
- Fmod (Ch6) : 0 : Level mode
- Fmod (Ch6) : 1 : Accro mode
- 3 timers defined
- At startup, Tx display a warning if : THR is not at -100 or Hold != 0
- Icon in attachments
You need to define rxrange in betaflight configurator :
From CLI tab (betaflight configurator) type :
rxrange 0 1159 1841
rxrange 1 1159 1841
rxrange 2 1159 1841
rxrange 3 1159 1841
save
At the first connection between Devo7e and Lizard, you must follow binding protocol :
From CLI tab (betaflight configurator) type :
set spektrum_sat_bind = 9
Then type :
Remove USB cable from Lizard, wait a second and reconnect cable.
In devo7e, Menu -> Model Menu -> Model Setup -> Click on "Bind" button.
From CLI, type
set spektrum_sat_bind = 0
save
