JUMPER TS8G with RF8 or Phoenix?

Start
Prev
1
Next
End

Brett_N
Topic Author
Offline

02 Dec 2018 21:21 #71961 by Brett_N

JUMPER TS8G with RF8 or Phoenix? was created by Brett_N

Does anyone have a quick guide to get the Jumper to work with the flight sims?

I let someone borrow my DXe that I used for sims....would like to use Jumper but all I can get it to connect to is USB file system.

Ideas?

Please Log in or Create an account to join the conversation.

Fernandez
Offline

03 Dec 2018 10:16 #71962 by Fernandez

Replied by Fernandez on topic JUMPER TS8G with RF8 or Phoenix?

You can just plug in a USB cable and select that option under protocols, and it will be recognized as HID device.

So not even the need for ppm dongle.

Please Log in or Create an account to join the conversation.

goebish
Offline
I Void Warranties

03 Dec 2018 11:01 #71964 by goebish

Replied by goebish on topic JUMPER TS8G with RF8 or Phoenix?

For (genuine) Phoenix you have to use the provided dongle (3.5mm Jack) and select the PPM protocol.

Please Log in or Create an account to join the conversation.

Brett_N
Topic Author
Offline

06 Dec 2018 01:20 #71991 by Brett_N

Replied by Brett_N on topic JUMPER TS8G with RF8 or Phoenix?

duh...thanks guys. I completely forgot I had already set it up.

USB HID works great for Realflight. PPM works perfect for PHX (with the dongle...)

Please Log in or Create an account to join the conversation.

Start
Prev
1
Next
End

Time to create page: 0.033 seconds