Problem with Jumper T8SG Plus and UR85HD (DSMX)

Start
Prev
1
Next
End

Molder
Topic Author
Offline

26 Oct 2020 14:35 #76938 by Molder

Problem with Jumper T8SG Plus and UR85HD (DSMX) was created by Molder

Hi,

i have problems with Jumper T8SG Plus and UR85HD (DSMX).

I have installed 4.0.6 betafligh firmware on the drone and the transmitter seems to work but when i connect the battery and i try to arm the motors nothing happen...

What did i do wrong?

Thank you very much

Please Log in or Create an account to join the conversation.

vlad_vy
Offline

26 Oct 2020 15:15 - 26 Oct 2020 15:17 #76939 by vlad_vy

Replied by vlad_vy on topic Problem with Jumper T8SG Plus and UR85HD (DSMX)

I think you need change(increase) channels "Scale" in channel properties to get betafligh 1000 - 2000ms range.

Or use betaflight CLI to change rxrange for used channels to current range 1159 - 1841.

rxrange 0 1159 1841
rxrange 1 1159 1841
rxrange 2 1159 1841
...
...
save

Last edit: 26 Oct 2020 15:17 by vlad_vy.

Please Log in or Create an account to join the conversation.

Molder
Topic Author
Offline

26 Oct 2020 16:02 #76940 by Molder

Replied by Molder on topic Problem with Jumper T8SG Plus and UR85HD (DSMX)

Ok thx,

maybe i have resolved changing the minimun rate of thottle 1050 is too high.

Thank you

Please Log in or Create an account to join the conversation.

Start
Prev
1
Next
End

Time to create page: 0.129 seconds

Problem with Jumper T8SG Plus and UR85HD (DSMX)

Attachments: