Devo 10 Help

Hi all,

I fly a MiniCP, v120d0s, v400, and a black angel 450 with a walkera rx. I had everything set up on my devo 10 and all four flew great. I am getting an atom 500 with an AR7200bx so thought I would upload the deviation firmware to fly all my heli's with one remote. I wrote down all my settings from the old devo and uploaded. Well, I have tried to program the devo 10 with the deviation and can't get the setups correct. Can anyone give me any advise? If not I will have go back to devention and buy a DX8.

Try searching the Model Configs forum. For example, found this .

TomZ's configs usually work very well. If you want to convert the walkera settings, did you convert the values? IIRC, Walkera uses 0->100, where deviationtx uses -100->100. So you need to double the numbers and subtract 100.