Blade Nano CP S with SAFE technology

Would someone make me an Advanced GUI file using the stock settings on page 6 of the Blade Nano CP S (DSMX) Heli Manual? I have been reading the Deviation manual and searching the forum, but still unclear how to do it.
I have the Devo 8S with Nightly Build from 10/25/2015 and would like:
Throttle Hold = RUDD D/R Pos 0 Off / Pos 1 On
Panic = ELEV D/R Pos 0 Off / Pos 1 On
FMOD 0, 1, 2 for Stability, Agility, 3D modes respectively.
D/R and Expo settings on AILE Switch POS 0 = 100/100 +25 / POS 1 = 75/75 +25

www.horizonhobby.com/pdf/BLH2400-Manual-EN.pdf

Does this thread answer your need?

www.deviationtx.com/forum/model-configs/...lade-nano-cp-s#40006

I saw that, but not sure they are the default settings. Since I don't understand how the Advanced GUI works, I wasn't sure how to make changes to it and was afraid I'd mess it up playing around with settings. He has Mix listed below at 100/80/70. Are these the D/R settings set to the Mix Switch and if so can it be changed to the AILE switch instead? In the Nano manual it shows D/R at 100/100 and Expo +25 for Aile, Elev, Rudd in FMOD 0 and 1 and FMOD 2 has D/R 75/75 with +25 expo for Aile. Ele, and Rudd. I think all the rest of his settings are what I was looking for. Just don't understand where and how to make the default value changes to the D/R and expo settings or how to assign them to the AILE switch.

Here my Devo8 S file for the new Blade Nano CP S
Flight modes on FMOD 0-2
Motor Cut on RDD D/R
Panic Button function on ELEV D/R
Mix 0-2 Dualrate 100/80/70