X007 NightHawk drone

Hi all!
I've got an X007 NightHawk drone ordered, and I was wondering, does anyone happen to know what protocol this baby uses? I really would rather use my modded and deventioned 7e radio, not the one that comes with the drone. Thanks for any help you can offer.
Happy flying!

Russ

Ok, nevermind.
I figured it out. The protocol is CX10 with DM007 format. The channels seem to be as follows,
Channel 1 = ELE
Channel 2 = AIL
Channel 3 = THR
Channel 4 = RUD
Channel 5 = Rate 0-100
Channel 6 = Flip
Channel 7 = Picture
Channel 8 = Video
Channel 9 = Headless
Channel 10 = RTH
The attached ini file seems to work well for me. Fmod switch controls low/high rate. Up/Dn buttons turn video on and off. EXT button toggles headless mode. Rudder trim switch is for flip mode (hold switch while moving full ail/elev in any direction, the quad will flip in that direction, release button to complete stunt.) The throttle trim switch takes a picture. The hold switch is a sticky throttle hold, return throttle stick to zero to re-activate throttle.
Have fun!

Deviated, not deventioned. Devention is the original Walkera's name for the line of transmitters, Deviation is the name of firmware you installed on it, thus deviating it

I am thus Deviated!

BTW, heres the model file!