JUMPER Bind RadioLink

Start
Prev
1
Next
End

Drons
Topic Author
Offline

11 Jan 2018 16:08 #66862 by Drons

JUMPER Bind RadioLink was created by Drons

Hello everyone, can someone help me how to connect the JUMPER with the RX radiolink R9D?

Greetings from Mexico.

Please Log in or Create an account to join the conversation.

vlad_vy
Offline

11 Jan 2018 16:22 #66863 by vlad_vy

Replied by vlad_vy on topic JUMPER Bind RadioLink

Radiolink protocol not supported.

Please Log in or Create an account to join the conversation.

Drons
Topic Author
Offline

11 Jan 2018 19:06 #66869 by Drons

Replied by Drons on topic JUMPER Bind RadioLink

Ok

Thanks vlad.

Please Log in or Create an account to join the conversation.

Moeder
Offline

12 Jan 2018 12:44 #66878 by Moeder

Replied by Moeder on topic JUMPER Bind RadioLink

Has anyone looked into writing a radiolink protocol module? I know it uses a cc2533, but besides that I have not found any protocol specs...

Please Log in or Create an account to join the conversation.

Drons
Topic Author
Offline

12 Jan 2018 14:21 #66879 by Drons

Replied by Drons on topic JUMPER Bind RadioLink

I hope someone.

Saludos Moeder.

Please Log in or Create an account to join the conversation.

Fernandez
Offline

12 Jan 2018 15:45 #66880 by Fernandez

Replied by Fernandez on topic JUMPER Bind RadioLink

there is a topic on the radolink here, I beleive there is an mcu embedded with rf chip, so tapping the control of the RF chip is difficult.
But maybe Goebish could give it a try with his Hack RF it would be a major break true, over the air cracking?

Please Log in or Create an account to join the conversation.

Moeder
Offline

12 Jan 2018 16:10 #66881 by Moeder

Replied by Moeder on topic JUMPER Bind RadioLink

No, rf module is connected via spi in radiolink TX, so simple LA and then taking a look at how the module is setup is all we need at first.

Please Log in or Create an account to join the conversation.

Fernandez
Offline

12 Jan 2018 17:43 #66882 by Fernandez

Replied by Fernandez on topic JUMPER Bind RadioLink

Quote from datasheet: "The CC2533 combines the excellent performance of a leading RF transceiver with a single-cycle 8051 compliant CPU"

Please Log in or Create an account to join the conversation.

Start
Prev
1
Next
End

Time to create page: 0.036 seconds

Force desktop display