Req Devo10 Betaflight w/ flightmodes, ARM + Buzzer

More
08 Mar 2018 13:25 #67970 by HotRodDevil
Hi!

Sorry this must have been asked before but I'm a total noob and I've tried to understand from other threads but configuring this is just too overwhelming, it seems.

My request is for quad with DEVO 10 + Deviation 5.0 and Walkera sbus receiver, please don't offer DEVO 7 or other as they won't work without changes, thank you :

- usable with Betaflight
- general 4-channels for control
- 3 flightmodes for MIX switch,
- headless mode AILE D/R switch
- arm / disarm motors for ELEV/DR switch
- maybe activating buzzer from RUDD / DR switch if possible

Thanks in advance!

Cheers,
Matti

Please Log in or Create an account to join the conversation.

More
09 Mar 2018 07:24 #67974 by HotRodDevil
Replied by HotRodDevil on topic Req Devo10 Betaflight w/ flightmodes, ARM + Buzzer
After some youtubeing I managed to come up with this, needs refining tho but at least all controls and switches are working in Betaflight.

name=test
mixermode=Advanced
icon=RACER250.BMP
type=plane
[radio]
protocol=DEVO
num_channels=8
tx_power=100mW

[protocol_opts]
Telemetry=On

[channel1]
template=simple
[mixer]
src=ELE
dest=Ch1

[channel2]
template=simple
[mixer]
src=AIL
dest=Ch2

[channel3]
template=simple
[mixer]
src=THR
dest=Ch3

[channel4]
template=simple
[mixer]
src=RUD
dest=Ch4

[channel5]
template=simple
[mixer]
src=RUD DR1
dest=Ch5
curvetype=expo
points=0,0

[channel6]
template=complex
[mixer]
src=AIL
dest=Ch6
switch=FMODE0
scalar=-100
usetrim=0
curvetype=fixed
[mixer]
src=AIL
dest=Ch6
switch=FMODE1
scalar=0
usetrim=0
curvetype=fixed
[mixer]
src=AIL
dest=Ch6
switch=FMODE2
usetrim=0
curvetype=fixed

[channel7]
template=simple
[mixer]
src=AIL DR1
dest=Ch7
curvetype=expo
points=0,0

[channel8]
template=simple
[mixer]
src=ELE DR1
dest=Ch8
curvetype=expo
points=0,0

[trim1]
src=LEFT_V
pos=TRIMLV+
neg=TRIMLV-
[trim2]
src=RIGHT_V
pos=TRIMRV+
neg=TRIMRV-
value=3,0,0
[trim3]
src=LEFT_H
pos=TRIMLH+
neg=TRIMLH-
[trim4]
src=RIGHT_H
pos=TRIMRH+
neg=TRIMRH-
[timer2]
type=countdown
time=10
[datalog]
switch=None
rate=1 sec
[safety]
Auto=min
[gui-128x64]
V-trim=55,10,1
H-trim=1,59,3
V-trim=69,10,2
H-trim=78,59,4
Big-box=2,12,Ch3
Small-box=2,28,Timer1
Small-box=2,38,Timer2
Small-box=2,48,Timer3
Bargraph=79,30,Ch1
Bargraph=85,30,Ch2
Bargraph=91,30,Ch3
Bargraph=97,30,Ch4
Bargraph=103,30,Ch5
Bargraph=109,30,Ch6
Bargraph=115,30,Ch7
Bargraph=121,30,Ch8
Toggle=75,13,1,64,128,FMODE
Toggle=84,13,2,65,129,MIX
Toggle=93,13,0,5,0,ELE DR
Toggle=102,13,0,4,0,AIL DR
Toggle=111,13,0,8,0,GEAR
Toggle=120,13,0,3,0,RUD DR
Battery=102,1
TxPower=75,1

Please Log in or Create an account to join the conversation.

Time to create page: 0.039 seconds
Powered by Kunena Forum