SoloPro 260A Nordic nRF24L01+ spi module

I know this doesn't follow protocol request rules, but anyway...

Is it possible to port old SoloPro 260A to deviation ?

The code is already written by kile at RCG to run on an AVR.

www.rcgroups.com/forums/showthread.php?t=1564343

Nordic nRF24L01+ module is SPI.

http://www.befr.ebay.be/itm/2PCS-NEW-NRF24L01-2-4GHz-Antenna-Wireless-Transceiver-Module-/140729184907?pt=LH_DefaultDomain_0&hash=item20c41cf28b

There is also a module with antenna :

http://www.befr.ebay.be/itm/2PCS-NEW-NRF24L01-2-4GHz-Antenna-Wireless-Transceiver-Module-/140729184907?pt=LH_DefaultDomain_0&hash=item20c41cf28b

But it isn't necessary as kile demonstrated on the thread linked.

I for one don't see the need for you to have the Rx (unless you wanna do some debugging), because the protocol was already reverse engineered by kile, and the code written for an avr in (I think) C.

I am using his module to pilot my three SP 260a and haven't had any issue, his code is rock solid.

For you porting it would be a peace of cake.

I would think if kile provided the source with a GPLv3 and deviation being an open-source project, he wouldn't mind.

Unless you are against using code from someone else, or you don't want your code under v3 (didn't look at the license you use).

Does it take less time for you if you reverse engineer it ?

Or you just want to be thorough and have it completely documented ?

I would offer to send you one of my SP boards, but you seem reluctant to it.

Mainly because you don't want strings attached, as I understand your point of view, I for one won't be the guy telling you "hey dude where's my protocol, as I sent you a board for it...".

I'm not that kind of person, I love contributing to open source projects, we need that kind of commitment and selfless act of doing things just to help others.

And as I can't program, I try to contribute with whatever is needed.

I reckon, I couldn't beta test it for you, since I don't own a Devention transmitter.

I'm stretched between buying a combo with devo10, or wait for you to complete the "devo7 enhancement" project.

Once again thank you for your commitment.

oups didn't saw it that way.

Sorry and pm replied

Hi - just curious in this as well. Is the support for this still in development or was it dropped?

Do you want me to design and make a small board which will provide multiplexing for CS signal? TMS and TCK is enough to provide a choice for 4 radios, though you'll need to disconnect CS from original radio and pass it through the board. 4 radios cover almost everything - CYRF6936, A7105, CC2500, and finally nRF24L01.

Forgot to add that CE for nRF24L01 can always be asserted - you can switch the radio via SPI and initially it's off.

Which ones are 5v? I thought there are no radio chips working on 5v, only 3.3v. It complicates it a bit, if it's so.

was waiting for a solo pro 260 code for a very long time, for years literally. will it happen though? because if its not gonna happen, ill just have to change the RX of my bravo sx. pls. give us un update.

oh ok, its an old protocol anyways plus the board's gyro is out dated, rolls are sensed as yaw too.