- Posts: 6
JD 395 cx-10
- staryk
- Offline
I will buy the logic analyzer, but it is not quick - Mail from China to Russia takes some time
Please Log in or Create an account to join the conversation.
- Batam
- Offline
- Posts: 16
The TX/RX chip that it used by your CX-10.
Please Log in or Create an account to join the conversation.
- staryk
- Offline
- Posts: 6
Please Log in or Create an account to join the conversation.
- goebish
- Offline
- I Void Warranties
- Posts: 2631
Please Log in or Create an account to join the conversation.
- 187
- Offline
- Posts: 16
Please Log in or Create an account to join the conversation.
- goebish
- Offline
- I Void Warranties
- Posts: 2631
Dump welcome if you've got a logic analyzer ...
Please Log in or Create an account to join the conversation.
- victzh
- Offline
- Posts: 1386
Please Log in or Create an account to join the conversation.
- goebish
- Offline
- I Void Warranties
- Posts: 2631
Please Log in or Create an account to join the conversation.
- FDR
- Offline
This way you would need less reverse engineering resources...
Please Log in or Create an account to join the conversation.
- Sicon
- Offline
- Posts: 12
Thank You!!!
Please Log in or Create an account to join the conversation.
- Batam
- Offline
- Posts: 16
Can't manage to have high rate with CX10.
Not as fast as with stock TX in expert mode.
Please Log in or Create an account to join the conversation.
- IKKI
- Offline
- Posts: 87
the controls are to be reversed, but once we settled everything with the mixer running. My big problem is that each one of the missing two functions. Which are those of camera and camcorder. O LED lighting and double flip in the case of the model 3015-2. Some of you can help me. Also since taking both sticks in the bottom outwards turns on / off function without head, you can activate it only with a switch or button? Thank you.
www.rcgroups.com/forums/showthread.php?t=2467699
www.rcgroups.com/forums/showthread.php?t=2404783
Please Log in or Create an account to join the conversation.
- goebish
- Offline
- I Void Warranties
- Posts: 2631
Please Log in or Create an account to join the conversation.
- IKKI
- Offline
- Posts: 87
But I would not know where to start. : P
Please Log in or Create an account to join the conversation.
- goebish
- Offline
- I Void Warranties
- Posts: 2631
Sebydocky wrote a guide: www.deviationtx.com/forum/protocol-devel...95-spi-capture-guide , but if it's not clear you can take pictures of the inside of your TX then we'll tell you where to solder the probes.
Please Log in or Create an account to join the conversation.
- IKKI
- Offline
- Posts: 87
but is out of stock on Banggood.
I found this www.amazon.co.uk/Hobby-Components-24MHz-...id=1444298228&sr=1-4
You can advice better price?
Please Log in or Create an account to join the conversation.
- goebish
- Offline
- I Void Warranties
- Posts: 2631
Give me a few moments
Which radio do you have ? Devo 10 ? 7e ?
For the analyzer, you can have a look on ebay, search for 8 channel logic analyzer.
Please Log in or Create an account to join the conversation.
- IKKI
- Offline
- Posts: 87
Thanks!
Please Log in or Create an account to join the conversation.
- goebish
- Offline
- I Void Warranties
- Posts: 2631
Please Log in or Create an account to join the conversation.
- IKKI
- Offline
- Posts: 87
With blue protocol start to fly, and i had problem.
For headless mode i have to put two stick on extern down, i don't know if is possible set a function and activate in on fly!
Please Log in or Create an account to join the conversation.
- Home
- Forum
- Development
- Protocol Development
- JD 395 cx-10