Floureon FX-10 Protocol

Start
Prev
1
Next
End

goophoba
Topic Author
Offline

19 Aug 2015 15:04 - 19 Aug 2015 15:07 #37039 by goophoba

Floureon FX-10 Protocol was created by goophoba

Just a heads up for anyone searching for this. The Floureon FX-10 works on the latest release using the CX-10 protocol and the Blue-A sub-option.

Last edit: 19 Aug 2015 15:07 by goophoba. Reason: typo, grammar

Please Log in or Create an account to join the conversation.

SeByDocKy
Offline

19 Aug 2015 18:19 #37046 by SeByDocKy

Replied by SeByDocKy on topic Floureon FX-10 Protocol

goophoba wrote: Just a heads up for anyone searching for this. The Floureon FX-10 works on the latest release using the CX-10 protocol and the Blue-A sub-option.

Thanks for the info

Please Log in or Create an account to join the conversation.

IndoorFlyer
Offline

19 Aug 2015 22:19 - 19 Aug 2015 22:22 #37052 by IndoorFlyer

Replied by IndoorFlyer on topic Floureon FX-10 Protocol

Same probably applies to the DHD Drone D1, as I can fly the recent version of the CX-10 with the controller that came with the Drone D1. From what I understand, the Floureon and Drone D1 are from Cheerson, I remember seeing a picture of a spare receiver board, having CX printed on it.

Last edit: 19 Aug 2015 22:22 by IndoorFlyer.

Please Log in or Create an account to join the conversation.

Multirotor Go
Offline

18 Dec 2015 01:58 - 18 Dec 2015 01:59 #41010 by Multirotor Go

Replied by Multirotor Go on topic Floureon FX-10 Protocol

Hello

I would like to know how to get the highest rate with out the headles and how to have the flips
I have Devo /e with just the two, two switches.
I am using this:

name=CX-10 blue
mixermode=Advanced
[radio]
protocol=CX10
num_channels=5
fixed_id=123456
tx_power=1mW

[protocol_opts]
Format=Blue-A

[channel1]
template=simple
[mixer]
src=AIL
dest=Ch1

[channel2]
template=simple
[mixer]
src=ELE
dest=Ch2

[channel3]
template=simple
[mixer]
src=THR
dest=Ch3

[channel4]
template=simple
[mixer]
src=RUD
dest=Ch4

[channel5]
template=complex
[mixer]
src=AIL
dest=Ch5
switch=FMODE0
scalar=0
offset=-50
usetrim=0
curvetype=fixed
[mixer]
src=AIL
dest=Ch5
switch=FMODE1
scalar=0
offset=125
usetrim=0
curvetype=fixed

[channel6]
template=simple
[mixer]
src=HOLD1
dest=Ch6
curvetype=expo
points=0,0

[trim1]
src=LEFT_V
pos=TRIMLV+
neg=TRIMLV-
[trim2]
src=RIGHT_V
pos=TRIMRV+
neg=TRIMRV-
[trim3]
src=LEFT_H
pos=TRIMLH+
neg=TRIMLH-
value=-3,0,0
[trim4]
src=RIGHT_H
pos=TRIMRH+
neg=TRIMRH-
[timer2]
type=countdown
time=10
[safety]
Auto=min
[gui-128x64]
V-trim=59,10,1
H-trim=5,59,3
V-trim=65,10,2
H-trim=74,59,4
Small-box=2,22,Ch3
Small-box=2,31,Timer1
Small-box=2,39,Timer2
Model=75,20
quickpage1=Telemetry monitor

I have similar problem with CX10 red board and green board I can get the highest rate

And I would like to implement flips but not on sticks.

Last edit: 18 Dec 2015 01:59 by Multirotor Go. Reason: Because I can

Please Log in or Create an account to join the conversation.

Start
Prev
1
Next
End

Time to create page: 0.053 seconds

Re-enable mobile display