Flysky AFHDS 2A, protocol as used i10, i6, iT4,

Goebish, thanks your works are always appreciated!!

goebish wrote: @daniel.snowsurf I've hacked a 7e firmware with extended telemetry support for FrSky D & AFHDS 2A protocols at the expense of a few disabled stuffs (VIBRATINGMOTOR, MULTIMOD_SUPPORT, 4IN1FLASH). Also, I had to use size optimization flag for armgcc, I'm not sure this doesn't have any side effects, but everything seems to be fine, this firmware has been used by a few people since June already.
build: www.dropbox.com/sh/v1ckkohd8nmlc5a/AAA_n..._wCGMl8qbdtOgRa?dl=0
source: github.com/goebish/deviation/tree/7e_extended_telem

Thanks for the build. Sorry for answering so late, but I was having problems with the login.
In the meantime got docker runing over VMware and did a build myself, not easy but I got it. Something more drastic, removed the standard GUI completely (I never use it) and got space for the layout editor & extended telemetry.

My friends,

Do you think it's possible to use nrf24l01 to communicate with i10, i6... radios/receiver? I mean, the A7105 chip is not easy to find here in brazil so I am wondering how easy it would be to receive data from my TGY-I6 radio and sent it to nrf24l01 (connect to arduino).

Thanks.

Thanks man, so I will give up using nrf24l01. I congrat you for the really nice work you did into this, you made a great job!

goebish great job for this, anyway how often the telemetry update, I feel that update every 10 seconds which is a bit slow, not sure what did I do wrong. I also do not know which value I have to set to alarm and monitor to show on the screen, it seem they use different name and they don't have all the value can show and monitor. I just want Devo alarm me when I got low voltage.

goebish wrote: @daniel.snowsurf I've hacked a 7e firmware with extended telemetry support for FrSky D & AFHDS 2A protocols at the expense of a few disabled stuffs (VIBRATINGMOTOR, MULTIMOD_SUPPORT, 4IN1FLASH). Also, I had to use size optimization flag for armgcc, I'm not sure this doesn't have any side effects, but everything seems to be fine, this firmware has been used by a few people since June already.
build: www.dropbox.com/sh/v1ckkohd8nmlc5a/AAA_n..._wCGMl8qbdtOgRa?dl=0
source: github.com/goebish/deviation/tree/7e_extended_telem

I'll probably not maintain it, that will be up to you to merge this branch with current master in order to update your build (if even possible, this build is already using most of the available flash space: 114.61kB out of 116kB).

ps: special thanks to my old armgcc toolchain (4.8.3) that produces smaller binaries than the current versions

I have test on my Taranis Qx7, it is updated immediately. But for Devo 7e it is delay liked 15 seconds. I use "Transmitter menu" >"Telemetry Monitor" to monitor it. In theMisc column it is updated real time, but not for Bat and Cells

Did you check with RX/TX seperated at few meters range to be sure there is no swamping at of the RX side in the transmitter?

Yes, I did test that 4 meters away, I tested with Tinyfish board.

Hi Guys,

I've been having some issue with the afhds02a and the FS-iA6B. I have my devo 7e moded (A7105) and with deviation-devo7e-v5.0.0-8cddd9d,

I manage to bind it successfully but there seems to be a delay of about a second between my input in the transmitter and the action in the servos. I checked with other transmitters like DMX and Walkera and this delay does not happen.

Has anyone encountered this issue? does someone has a clue of how to fix it?

Thank you in advance.

also have same issue with this

www.banggood.com/Tiny-Frsky-8CH-Receiver...der&cur_warehouse=CN

I have no issues with 7e and X6B receiver. I have this A7105 module installed:
https://www.banggood.com/es/A7105-Wireless-RF-2_4GHz-Transceiver-Module-3_3V-Power-Supply-Module-p-909404.html?cur_warehouse=CN
With nightly build it was working fine, no delays. And the same with the custom build with extended telemetry. You can download the build to test it:
devo 7e AFHDS 2A extended telemetry
- No standard GUI
- Extended telemetry only for AFHDS 2A
- Page layout editor

marcelobm and cmonz, if you test the nightly build it should work fine, no delays.

goebish wrote: Devo 8
Devo 10
Devo 12
source

I had to merge PPM & SBUS output options into the same item, so this is a 4 choices option:

• PWM + IBUS (default)
• PPM + IBUS
• PWM + SBUS
• PPM + SBUS

Hi everybody,
I am new to this forum so please excuse my noobness. It seems I don't get AFHDS 2A working on my DEVO 10 whatever I try. I installed the very 4in1 module as described here , after that I uncommented the respective modules in the hardware.ini using the devo10-v5.0.0-ed27f5f DFU.
Accessing the model setup I don't find the AFHSD2A protocol selectable in the menu and FlySky won't bind with my FS-A8S. The receiver is OK as checked with the FlySky TX of a friend.
Do you have any suggestions or f/w version for the DEVO 10 with the AFHSD2A protocol selectable as the above URLs aren't valid anymore?
Thanks.
Holger

Hi guys,
Do you have an idea what else to try getting my devo 10 to work with FlySky/AFHDS2A... FS A8S?
I installed the 4in1 module and uncommented the modules in the hardware.ini. No error messages etc.
The remote works nicely with DSM2/X and some proprietary protocols. Nevertheless, it won't show AFHDS 2A in the protocol section of the remote whatever I do. Since all of the dropbox links for DEVO 10 in this thread seem invalid could you point me to a file including AFHDS 2A, please?
Thanks.