Board shots for sj x300-2

This little wind cutter is a beast with the toy grade stock tx,I wll be attempting capture for the first time.I hope a guru takes interest in this bird to get it deviated aviated,all helpful feedback is welcomed for this first time capture.Here are the guts of the stock tx.

The most interesting part of the board for the purposes of reverse engineering is the radio chip - the one closest to antenna. It is not sufficiently detailed on your photos to tell anything useful. Also, this forum has limitation on the size of the photos, so it's advisable to put them elsewhere and publish links here.

Thanks for the feedback,unfortunately this capture will be delayed do to my botched soldering,lol.Thank God this tx is only 7,78 used @ gearbest waiting for 2 to arrive. Sorry about the space with the photos just opened a media fire acct will upload and linkt there,Thanks again.

Is this a good thing?

Hey Goebish,I got frustrated after badly butchering the solder job I threw it in the trash.I order 2 from gearbest soon as they appear,I will take that pic.

Come on, man. I soldered so many things, but only today desoldering an antenna from Radiolink AT9 - no other way to disassemble it fully - I tore off a thin trace leading to this antenna. I was fortunate to be able to solder directly to the small part, but it happens all the time, nothing to be ashamed of or frustrated. Things break, especially in this hobby

Thanks for the words of encouragement,you're so right.I went through, 3 xl7105 modules and 1 devo 7E before I got it right,lol but in the end it definitely paid off for much fun as my compensation.I ordered 2 more tx from gb,crossing my fingers.I wish banggood sold them,this is such a good flyer.