Capture for RadioLink T6EHP TX

Hi there,

It is my first time doing capture.



The RadioLink is a 6 CH TX using a CC2500 RF module with PA. It is the usual stuff. Channel order showing up on the RX R6EH is aile, elev, throttle, rudder, gyro and pitch. Pitch is mapped from throttle in non-CCPM mode. Throttle hold suppresses throttle not pitch. Channels (except CH5 gyro) are not D/R'ed. Hence they would be swinging the full range. Gyro is configured to toggle between +/-50 with the gyro switch.

I can only download Logics 1.2.9. (64bit linux) Does the capture look OK?

Thanks.