- Posts: 106
Eachine E010 inductrix clone data captures
25 Sep 2016 20:12 #54260
by Sero
A day without flying can't be called a day.
Replied by Sero on topic Eachine E010 inductrix clone data captures
No, you don't have to, if you don't want to bind your quad to the DX8... 
A day without flying can't be called a day.
Please Log in or Create an account to join the conversation.
26 Sep 2016 05:13 - 26 Sep 2016 05:28 #54275
by Arnold
- Install an NRF module in your Devo8 and get it working properly.
- Configure an .ini file for the E010. Download one someone else has created to guide your learning. You can create it on the controller or using a text editor on your computer. Either way, it has to exist on your Devo8 in the "Models" folder.
- Connect the battery to your E010.
- Turn on your Devo8 and load the E010 configuration file. The E010 and Devo8 should bind.
Nice job!
Too many hobbies & too many Devos!
Who knows where the time goes?
Replied by Arnold on topic Eachine E010 inductrix clone data captures
- Install a recent Nightly Build of deviation .mr_tucsons wrote: i need to bind e010 to my devo 8.
- Install an NRF module in your Devo8 and get it working properly.
- Configure an .ini file for the E010. Download one someone else has created to guide your learning. You can create it on the controller or using a text editor on your computer. Either way, it has to exist on your Devo8 in the "Models" folder.
- Connect the battery to your E010.
- Turn on your Devo8 and load the E010 configuration file. The E010 and Devo8 should bind.
Nice job!
Too many hobbies & too many Devos!
Who knows where the time goes?
Please Log in or Create an account to join the conversation.
26 Sep 2016 09:29 #54280
by goebish
I still want them
The protocol is still not thoroughly understood and it's using only 1 set of radio channels for now.
Replied by goebish on topic Eachine E010 inductrix clone data captures
HappyHarry wrote: goebish i don't suppose you still want/need extra tx captures for their id's any more? as my rc club friends are starting to have their e010's arrive but if you don't need them i wont bother capturing them
I still want them
The protocol is still not thoroughly understood and it's using only 1 set of radio channels for now.
Please Log in or Create an account to join the conversation.
27 Sep 2016 10:38 #54329
by Toybomb
Replied by Toybomb on topic Eachine E010 inductrix clone data captures
attaching a longer capture with a bit of flying.
I notice it hops between channels 0x32, 0x3E, 0x42, 0x4E
Uploaded on mega cos it wont fit as forum attachment
https://mega.nz/#!vdJTkbjB!Jrg7p1AOlXP8FBoOBBE1LM9oMf8AWeSUQgC566A0qj8
I notice it hops between channels 0x32, 0x3E, 0x42, 0x4E
Uploaded on mega cos it wont fit as forum attachment
https://mega.nz/#!vdJTkbjB!Jrg7p1AOlXP8FBoOBBE1LM9oMf8AWeSUQgC566A0qj8
Please Log in or Create an account to join the conversation.
27 Sep 2016 10:43 - 23 Oct 2016 02:06 #54330
by goebish
Replied by goebish on topic Eachine E010 inductrix clone data captures
Always try to host your files on an external service, forum resources are limited 
Ok thanks, so here's the data we have for now:
Observations so far:
channel[0] = 0x2e + ( txid[0] % 8 ); // almost works, except with #1 & #4
channel[1] = ???
channel[2] = channel[0] + 0x10;
channel[3] = channel[1] + 0x10;
That's a pity that the MCU+RF are in the same chip in the RX, that prevents me to tap on the RX to generate arbitrary tx id / rf channels tables
Ok thanks, so here's the data we have for now:
TX ID RF Channels
----- -----------
#1 4F 1C 3A 35 4A 45
#2 90 1C 2E 36 3E 46 (same as bind channels !)
#3 24 36 32 3E 42 4E
#4 7A 40 2E 3C 3E 4C
#5 61 31 2F 3B 3F 4B
#6 5D 37 33 3B 43 4B
#7 FD 4F 33 3B 43 4B --> #6 & #7 are using the same channels
#8 86 3C 34 3E 44 4E
"base" channels, used for bind:
2E 36 3E 46Observations so far:
channel[0] = 0x2e + ( txid[0] % 8 ); // almost works, except with #1 & #4
channel[1] = ???
channel[2] = channel[0] + 0x10;
channel[3] = channel[1] + 0x10;
That's a pity that the MCU+RF are in the same chip in the RX, that prevents me to tap on the RX to generate arbitrary tx id / rf channels tables
Please Log in or Create an account to join the conversation.
28 Sep 2016 19:24 - 28 Sep 2016 20:07 #54379
by goebish
Replied by goebish on topic Eachine E010 inductrix clone data captures
please post .logicdata files, your csv isn't compatible with my decoder.
edit: that's fine, I made my decoder compatible with your file
edit: that's fine, I made my decoder compatible with your file
Please Log in or Create an account to join the conversation.
Time to create page: 0.083 seconds
-
Home
-
Forum
-
Development
-
Protocol Development
- Eachine E010 inductrix clone data captures