- Posts: 2631
Eachine E010 inductrix clone data captures
28 Aug 2016 18:48 #53214
by goebish
Replied by goebish on topic Eachine E010 inductrix clone data captures
Cool, next step will be to try to crack txid / rf channel relationship, or at least have captures from at least 5-6 transmitters so we can race without interferences 
Please Log in or Create an account to join the conversation.
28 Aug 2016 19:47 #53216
by rasqba
Let's hope it's not as difficult as the DSMX "enigma" haha
Good luck and thanks
Replied by rasqba on topic Eachine E010 inductrix clone data captures
goebish wrote: Cool, next step will be to try to crack txid / rf channel relationship, or at least have captures from at least 5-6 transmitters so we can race without interferences
Let's hope it's not as difficult as the DSMX "enigma" haha
Good luck and thanks Please Log in or Create an account to join the conversation.
29 Aug 2016 17:48 - 29 Aug 2016 17:57 #53243
by SeByDocKy
Replied by SeByDocKy on topic Eachine E010 inductrix clone data captures
There is a specific ID to give ? coz sometimes I can't bind ...it or have slow responses .... but maybe it's coming from nRF24L01..... I will check with another radio
EDIT: it's my NRF24L01 module ... sometimes not working
a small short somewhere for this radio
EDIT: it's my NRF24L01 module ... sometimes not working
a small short somewhere for this radio Please Log in or Create an account to join the conversation.
30 Aug 2016 20:59 #53300
by parriehunter
Hi I have installed this build but cannot get it to bind, does anyone have a model set up that I could try?
Thanks Guys and Girls
DEVO 7E
Hubsan X4
Replied by parriehunter on topic Eachine E010 inductrix clone data captures
goebish wrote: Ok, looks like it's running at 250kbps instead of 1Mbps
new build:
Devo 7e
crossing fingers
Hi I have installed this build but cannot get it to bind, does anyone have a model set up that I could try?
Thanks Guys and Girls
DEVO 7E
Hubsan X4
Please Log in or Create an account to join the conversation.
04 Sep 2016 10:00 #53463
by chaotix
I thought that was the case, thanks. I'll just stick to putting silverwared boards in these frames then
Replied by chaotix on topic Eachine E010 inductrix clone data captures
goebish wrote: Rate is already set to expert.
I thought that was the case, thanks. I'll just stick to putting silverwared boards in these frames then
Please Log in or Create an account to join the conversation.
04 Sep 2016 10:12 - 04 Sep 2016 10:23 #53464
by goebish
Replied by goebish on topic Eachine E010 inductrix clone data captures
Yeah, I've ordered an E010 + a spare frame as well to try to use a "Silverxxxized" H8 mini FC on it
(I already have a bunch of high KV 0615 Chaoli motors to go with them + 2 spare fx798t micro fpv pods)
(I already have a bunch of high KV 0615 Chaoli motors to go with them + 2 spare fx798t micro fpv pods)
Please Log in or Create an account to join the conversation.
05 Sep 2016 02:38 #53480
by poohnyan
Replied by poohnyan on topic Eachine E010 inductrix clone data captures
Hey guys,I have a devo7e and devo10. I was able to bind in devo7e. However, in devo10 could not be bind.
Do not be bind in devo10?
Thanks!
Do not be bind in devo10?
Thanks!
Please Log in or Create an account to join the conversation.
05 Sep 2016 10:26 - 05 Sep 2016 10:27 #53494
by poohnyan
Replied by poohnyan on topic Eachine E010 inductrix clone data captures
Yes. I am adding the 3in1 module in my DEVO10. CX10 and V202, MJX protocol is bind without any problems.
Thanks goebish
Thanks goebish
Please Log in or Create an account to join the conversation.
Time to create page: 0.092 seconds
-
Home
-
Forum
-
Development
-
Protocol Development
- Eachine E010 inductrix clone data captures