1. Forum
  3. Development
  5. Protocol Development
  7. VISUO XS809H-W-HD-G (Bayang X16 AH) capture

VISUO XS809H-W-HD-G (Bayang X16 AH) capture

More
22 Nov 2018 23:34 #71846 by manotroll
Replied by manotroll on topic VISUO XS809H-W-HD-G (Bayang X16 AH) capture
any news about development?

Please Log in or Create an account to join the conversation.

More
22 Nov 2018 23:37 #71847 by goebish
Replied by goebish on topic VISUO XS809H-W-HD-G (Bayang X16 AH) capture
No, but if you've one I can make a test build during the week-end ...

Please Log in or Create an account to join the conversation.

More
23 Nov 2018 00:17 #71848 by manotroll
Replied by manotroll on topic VISUO XS809H-W-HD-G (Bayang X16 AH) capture
I have the compatible transmitter.
could create the firmware to put in it?
more has to be 4 in 1 module
github.com/pascallanger/DIY-Multiprotocol-TX-Module

Please Log in or Create an account to join the conversation.

More
23 Nov 2018 00:18 #71849 by goebish
Replied by goebish on topic VISUO XS809H-W-HD-G (Bayang X16 AH) capture
Don't you have a Deviation transmitter ?

If you only have a 4in1 maybe Pascal can do it ?

Please Log in or Create an account to join the conversation.

More
23 Nov 2018 06:22 #71850 by planger
Replied by planger on topic VISUO XS809H-W-HD-G (Bayang X16 AH) capture
I can do whatever but you have to brief me on what I need to do;)

Please Log in or Create an account to join the conversation.

More
23 Nov 2018 08:01 #71851 by goebish
Replied by goebish on topic VISUO XS809H-W-HD-G (Bayang X16 AH) capture
If I'm not mistaken that's the same protocol than the Bayang / X16-AH but it requires a different flag for motor start/stop:
www.deviationtx.com/forum/protocol-devel...apture?start=0#65200

Please Log in or Create an account to join the conversation.

More
23 Nov 2018 08:51 #71853 by planger
Replied by planger on topic VISUO XS809H-W-HD-G (Bayang X16 AH) capture
I'm wondering if I could do something as simple as replacing:
BAYANG_FLAG_EMG_STOP = 0x04,
with
BAYANG_FLAG_EMG_STOP = 0x04|0x08, // 0x08 for VISUO XS809H-W-HD-G

Please Log in or Create an account to join the conversation.

More
23 Nov 2018 08:55 #71854 by goebish
Replied by goebish on topic VISUO XS809H-W-HD-G (Bayang X16 AH) capture
That's worth a try, note that I might be wrong, I only had a quick look at the dump and that was more than one year ago.

Please Log in or Create an account to join the conversation.

More
23 Nov 2018 09:06 #71855 by planger
Replied by planger on topic VISUO XS809H-W-HD-G (Bayang X16 AH) capture
Multi v1.2.1.21 on github with the proposed flag addition.
Please test and report.
Pascal

Please Log in or Create an account to join the conversation.

More
23 Nov 2018 20:41 #71861 by manotroll
Replied by manotroll on topic VISUO XS809H-W-HD-G (Bayang X16 AH) capture
Could you put the link?

Please Log in or Create an account to join the conversation.

More
23 Nov 2018 21:34 - 23 Nov 2018 21:35 #71862 by planger
Replied by planger on topic VISUO XS809H-W-HD-G (Bayang X16 AH) capture
It's on my GitHub, update your module as usual.
github.com/pascallanger/DIY-Multiprotocol-TX-Module
Last edit: 23 Nov 2018 21:35 by planger.

Please Log in or Create an account to join the conversation.

More
23 Nov 2018 22:09 #71864 by manotroll
Replied by manotroll on topic VISUO XS809H-W-HD-G (Bayang X16 AH) capture
i.imgur.com/spgXrSX.jpg
using the Bayang X16 AH
something works
I did 2 videos recording alone, I'm going to see you +/-
now I'll test with your file to see
Can you pass me the link from your GitHub?


Please Log in or Create an account to join the conversation.

More
24 Nov 2018 00:39 #71867 by manotroll
Replied by manotroll on topic VISUO XS809H-W-HD-G (Bayang X16 AH) capture
I got these files here and replacing them did I do right?
github.com/pascallanger/DIY-Multiprotoco...9d5d6dd5bdb495dd2fb5

but it is not working correctly yet
I'm going to record a decent video tomorrow to demonstrate

Please Log in or Create an account to join the conversation.

More
24 Nov 2018 13:08 #71870 by planger
Replied by planger on topic VISUO XS809H-W-HD-G (Bayang X16 AH) capture
I don't understand what's not working from the videos...
I don't understand either when you say you replaced the files...
Pascal

Please Log in or Create an account to join the conversation.

More
24 Nov 2018 13:29 #71871 by manotroll
Replied by manotroll on topic VISUO XS809H-W-HD-G (Bayang X16 AH) capture
synchronized more tilted to the sides and broke a gear: \

now it will take time to get new ones in Brazil when I get back to report here

Please Log in or Create an account to join the conversation.

More
24 Nov 2018 18:16 #71873 by planger
Replied by planger on topic VISUO XS809H-W-HD-G (Bayang X16 AH) capture
I still don't understand what's wrong.... Thanks for not answering...

Please Log in or Create an account to join the conversation.

More
07 Jan 2019 02:05 #72221 by JayDrone
Replied by JayDrone on topic VISUO XS809H-W-HD-G (Bayang X16 AH) capture
no issues here - havnt tested via sd card but pritty sure camera still n video also controlable
Attachments:

Please Log in or Create an account to join the conversation.

More
07 Jan 2019 02:19 #72222 by JayDrone
Replied by JayDrone on topic VISUO XS809H-W-HD-G (Bayang X16 AH) capture
BAM

Please Log in or Create an account to join the conversation.

More
07 Jan 2019 09:52 #72225 by goebish
Replied by goebish on topic VISUO XS809H-W-HD-G (Bayang X16 AH) capture
Can you confirm that Pascal's patch is working ?
(add 0x08 to the emergency stop command).

Please Log in or Create an account to join the conversation.

More
07 Jan 2019 17:45 #72232 by HaCo
Replied by HaCo on topic VISUO XS809H-W-HD-G (Bayang X16 AH) capture
Could you please tell which file you used, and which module you need?
Thanks!

Please Log in or Create an account to join the conversation.

  1. Forum
  3. Development
  5. Protocol Development
  7. VISUO XS809H-W-HD-G (Bayang X16 AH) capture
Time to create page: 0.077 seconds
Powered by Kunena Forum
Re-enable mobile display