MJX Bugs 2 B2W

More
24 Dec 2017 20:16 #66602 by unknown
MJX Bugs 2 B2W was created by unknown
Hello,

Just have got MJX Bugs 2 B2W quad and would like to pair with my Devo 7E, but as I understood no protocol support exist..

Quad has stock MJX GR304 2.4GHz 4CH Two-way Transmitter.

Any info witch protocol used?

File Attachment:

File Name: 2017082314...0737.jpg
File Size:42 KB
Attachments:

Please Log in or Create an account to join the conversation.

More
25 Dec 2017 17:34 - 25 Dec 2017 17:40 #66604 by unknown
Replied by unknown on topic MJX Bugs 2 B2W
UPD: MJX GR304 2.4GHz 4CH Two-way Transmitter inside view, main chip NUVOTON N79E715AS20 (8-bit 8051 MCU)

Attachments:
Last edit: 25 Dec 2017 17:40 by unknown. Reason: link added

Please Log in or Create an account to join the conversation.

More
22 Apr 2019 20:50 #74094 by goebish
Replied by goebish on topic MJX Bugs 2 B2W
Ah ... looks like I'm late to the party :oops:

Can you post some logic analyzer dumps so we can check if Tx address is generated from Rx Id as the Bugs 3 Mini ?

Please Log in or Create an account to join the conversation.

More
24 Apr 2019 18:02 #74121 by JayDrone
Replied by JayDrone on topic MJX Bugs 2 B2W
flown bugs 2 on devo via jumper - it runs off of the same protocol as the bugs 3 - and rth will happen if u fly out of range and if battery voltage is super low - conecting it to the app would allow u to monitor the drones sats ect

Please Log in or Create an account to join the conversation.

More
24 Apr 2019 18:03 #74122 by JayDrone
Replied by JayDrone on topic MJX Bugs 2 B2W
also off brand flown too

Please Log in or Create an account to join the conversation.

More
24 Apr 2019 18:13 #74123 by goebish
Replied by goebish on topic MJX Bugs 2 B2W
Thanks JayDrone, I'll add them to the compatibility list, I though this RF module was hiding a XN297L under its shield but I was wrong ;)

Please Log in or Create an account to join the conversation.

More
25 Apr 2019 00:51 #74125 by JayDrone
Replied by JayDrone on topic MJX Bugs 2 B2W
u got it i havnt mapped the channels as I have just done long range fpv flights with it but again hook app up n start fliping toggles and BAM im sure mapping would be simple

Please Log in or Create an account to join the conversation.

Time to create page: 0.059 seconds
Powered by Kunena Forum