Protocol for Bugs 5W / JJRC X5

Hello,
I really would appreciate if the Bugs 5 W could be deviated / multiprotocoled. The transmitters of the Bugs 5W has the same appearance as the one from the Bugs 3 mini plus a display. Inside the PCBs share some similarities too, the main protocol chip seems to be a NUVOTON N76E0030T20. As the Bugs 3 mini is deviated I have high hopes that this affordable camera drone can be deviated soon.



I will work through the Bugs 3 mini thread, but what route is the easiest get the information needed ? I have a Saleae LA (though never worked with it), a Jumper T8SG V2 Plus and a Taranis Q X7 with I-Rangex multiprotol.

Greetings

Thanks Goebish
for tuning in. I have tried the Bugs 3 mini protocol on my T8SG V2 without success with the latest firmware you offered in the Bugs 3 mini thread (with dynamic trims). As the original remotes for the Bugs 3 mini and the Bugs 5w are only working with the right aircraft, not crosswise. The remotes will not bind. I assume it is a rxid/adress thing.
Will the XN297dump protocol which you showed on youtube be any help here ? Remember, I have Jumper T8SG V2 Plus at hand.
With not remotely debuggable you mean you need the transmitter and the receiver to do the deciphering ? An alternative would be a description on how you build your test rig for the Bugs 3 mini for getting the rxid/ adress table. I'm quite familiar with Arduino progamming, although not with the NRF24 right now.

Regards !

Hello,
thanks for the description of your test rig. I will order the needed stuff.
In the next week I will do a logic analyser dump, will see how that goes..

Transmitter RF module looks the same like B2W (and 3 mini) www.deviationtx.com/forum/protocol-devel.../7522-mjx-bugs-2-b2w
B2W protocol still not reversed...

Hello, do you have already find out the needed protocol for the MJX bugs 5W? I've also the Jumper 8SGPlus and I want to bind this with my brand new MJX bugs 5W. Any info will be welcome to bind this quad. I'm a completely blind person and fly in my own garden using my ears and it's fantastic to have control over my quads. I've already make a voicebox for the 8sgPlus and it speaks already but without binding with my b5w I cann't try ou t if this RC and the voice work well. Many thanks for any answere or solution where to find the protocol for our MJX bugs 5w.
At the moment I was upgrading to the last firmware but the bugs 5W isn't included in the list of protocols to select this one.
I and other Jumper T8sgPLUS users will appreciate adding this model and the right protocol for this one. Many thanks in advance !