Devo 10 Phoenix problem

Start
Prev
1
Next
End

FreeZeee
Topic Author
Offline

05 Jul 2014 21:39 #24403 by FreeZeee

Devo 10 Phoenix problem was created by FreeZeee

Hi everyone,
my grandfather bought some Walkera helicopter, Phoenix v5 and Devo 10 and i had to install Phoenix on his PC. But there is a problem. I installed it, Phoenix recognize USB Adapter (Or what is it), but it can't see Devo. What must i to do make it work well?
Thanks for questions and sorry for my english.

Please Log in or Create an account to join the conversation.

PhracturedBlue
Offline

06 Jul 2014 13:48 #24418 by PhracturedBlue

Replied by PhracturedBlue on topic Devo 10 Phoenix problem

Does your transmitter display that it is in buddy-box mode? I can't recall for sure, but on the devo10 you may need a mono jack (only 1 black ring on the plug from the USB adapter). You may need a mono to stereo converter.

But your Devo10 should recognize the simulator (it will switch into trainer mode) as soon as you turn it on (plug in the cable from the PC 1st), and enter buddy-box mode. Since I haven't used the stock firmware much, I can't really help much further.

Please Log in or Create an account to join the conversation.

FreeZeee
Topic Author
Offline

06 Jul 2014 14:54 #24422 by FreeZeee

Replied by FreeZeee on topic Devo 10 Phoenix problem

Sorry, I'm newbie in RC, how can I turn on buddy-box mode?

Please Log in or Create an account to join the conversation.

Start
Prev
1
Next
End

Time to create page: 0.025 seconds