walkera QR 350 pro and Devo 12fE settings

More
16 Aug 2014 23:11 - 17 Aug 2014 03:59 #25230 by samson56
hi
I bought a devo F12E for my QR 350 pro, does anyone have the seetings for it.
and how to get the ilook+ to start recording :unsure:
Last edit: 17 Aug 2014 03:59 by samson56.

Please Log in or Create an account to join the conversation.

More
17 Aug 2014 08:51 #25234 by samson56
Replied by samson56 on topic walkera QR 350 pro and Devo 12fE settings
that's strange no one from the team has a answer?

Please Log in or Create an account to join the conversation.

More
17 Aug 2014 13:12 #25239 by Fixy
This is the deviation forum. People here don't use the stock firmware so it might be hard to get help.

Anyway if you want to contribute it would be very nice if you could take pictures of the inside of the F12E so we can see if there's hope to see deviation run on it one day.

Please Log in or Create an account to join the conversation.

More
15 Dec 2014 14:22 #27000 by RC Addict
Replied by RC Addict on topic walkera QR 350 pro and Devo 12fE settings
I had the same problem with my Devo F12E and the iLook but you have on the top right hand side of the Devo you have the AILE D/R switch. When this is in 0 you flick it to 1, wait about 2 secs and then flick it back to 0 and the iLook should start flashing red and recording. To stop simply flick it back to 1, wait 2 secs and flick it back to the 0 position. :)
I am flying the black carbon Tali H500.
Hope this helps?

Please Log in or Create an account to join the conversation.

Time to create page: 0.028 seconds
Powered by Kunena Forum