T8SG V2.0 Plus display is crashed. What to do?

More
30 May 2020 16:33 #76383 by tankororin
When I try to upgrade T8SG 2.0 PLUS by dfu files, i missed.
Then it's display crashed.
After that, I tried to format this, but anything is not changed.
What is the problem, and What should I do?
Attachments:

Please Log in or Create an account to join the conversation.

More
31 May 2020 04:42 #76385 by vlad_vy
You need use "t8sg_v2" firmware.

Please Log in or Create an account to join the conversation.

More
31 May 2020 06:37 #76387 by tankororin
Replied by tankororin on topic T8SG V2.0 Plus display is crashed. What to do?
I tried it. but This firmware that I got is more than 2MB, and I can't install that in T8SG.
where can I get proper firmware?

Please Log in or Create an account to join the conversation.

More
31 May 2020 07:14 - 31 May 2020 07:16 #76389 by vlad_vy
To USB drive you don't need to write *.dfu, *.md and *.zip files from firmware archive.

www.deviationtx.com/downloads-new/category/13-nightly-builds
Last edit: 31 May 2020 07:16 by vlad_vy.

Please Log in or Create an account to join the conversation.

More
31 May 2020 08:12 #76390 by tankororin
Replied by tankororin on topic T8SG V2.0 Plus display is crashed. What to do?
I have done that. but, anything is not changed
It's difficult...
probably I mistake some steps, So I wish you tell me steps from first.

Please Log in or Create an account to join the conversation.

More
31 May 2020 10:19 #76391 by vlad_vy

Please Log in or Create an account to join the conversation.

Time to create page: 0.059 seconds
Powered by Kunena Forum