Joomla says you aren't logged in
model_config:syma_x1_model_and_icon:model2
name=Syma X1 mixermode=Advanced icon=SYMA-X1.BMP type=plane [radio] protocol=Flysky num_channels=5 fixed_id=357 tx_power=150mW [protocol_opts] WLToys V9x9=On [channel1] reverse=1 template=complex [mixer] src=AIL dest=Ch1 switch=FMODE0 scalar=80 curvetype=expo points=10,10 [mixer] src=AIL dest=Ch1 switch=FMODE1 curvetype=expo points=-20,-20 [mixer] src=AIL dest=Ch1 switch=FMODE2 scalar=125 curvetype=expo points=-60,-60 [channel2] reverse=1 template=complex [mixer] src=ELE dest=Ch2 switch=FMODE0 scalar=80 curvetype=expo points=10,10 [mixer] src=ELE dest=Ch2 switch=FMODE1 curvetype=expo points=-20,-20 [mixer] src=ELE dest=Ch2 switch=FMODE2 scalar=125 curvetype=expo points=-60,-60 [channel3] template=complex [mixer] src=THR dest=Ch3 switch=FMODE0 usetrim=0 [mixer] src=THR dest=Ch3 switch=FMODE1 usetrim=0 [mixer] src=THR dest=Ch3 switch=FMODE2 usetrim=0 [mixer] src=THR dest=Ch3 switch=Virt2 scalar=-100 usetrim=0 curvetype=fixed [channel4] reverse=1 template=complex [mixer] src=RUD dest=Ch4 switch=FMODE0 scalar=90 curvetype=expo points=10,10 [mixer] src=RUD dest=Ch4 switch=FMODE1 curvetype=expo points=-20,-20 [mixer] src=RUD dest=Ch4 switch=FMODE2 scalar=125 curvetype=expo points=-25,-25 [channel5] template=simple [mixer] src=Virt1 dest=Ch5 [virtchan1] template=complex [mixer] src=Virt1 dest=Virt1 [virtchan2] template=complex [mixer] src=Virt2 dest=Virt2 usetrim=0 curvetype=min/max points=0 [mixer] src=THR dest=Virt2 offset=-1 usetrim=0 muxtype=add [mixer] src=AIL dest=Virt2 switch=RUD DR1 usetrim=0 curvetype=fixed [trim1] src=LEFT_V pos=TRIMLV+ neg=TRIMLV- [trim2] src=RIGHT_V pos=TRIMRV+ neg=TRIMRV- [trim3] src=LEFT_H pos=TRIMLH+ neg=TRIMLH- [trim4] src=RIGHT_H pos=TRIMRH+ neg=TRIMRH- [trim5] src=Virt1 pos=TRIM_R- neg=TRIM_R- step=193 value=-100,0,0 [timer1] type=countdown src=THR time=480 [datalog] switch=None rate=1 sec [safety] Auto=min [gui-128x64] V-trim=59,10,1 H-trim=5,59,3 V-trim=65,10,2 H-trim=74,59,4 Small-box=2,22,Ch3 Small-box=2,31,Timer1 Small-box=2,39,None Model=75,20 Battery=102,1 Toggle=4,10,0,3,0,RUD DR Toggle=13,10,0,5,0,None Toggle=22,10,0,4,0,None Toggle=31,10,0,0,0,None Toggle=40,10,0,0,0,None TxPower=102,7 quickpage1=Model setup
model_config/syma_x1_model_and_icon/model2.txt (56970 views) · Last modified: 2014/02/18 21:06 by hexfet
Except where otherwise noted, content on this wiki is licensed under the following license: CC Attribution-Share Alike 4.0 International
