Joomla says you aren't logged in
model_config:trex_450_pro_fbl_tarot_xyz:model3
name=Tarot 450fbl [radio] protocol=DSM2 num_channels=6 tx_power=100mW [channel1] safetysw=RUD DR safetyval=-100 max=100 min=-100 template=expo_dr [mixer] src=THR dest=Ch1 curvetype=5point points=-100,-40,-40,-40,-40 [mixer] src=THR dest=Ch1 switch=FMODE1 scalar=40 curvetype=fixed [mixer] src=THR dest=Ch1 switch=FMODE2 curvetype=fixed [channel2] reverse=1 template=expo_dr [mixer] src=AIL dest=Ch2 scalar=60 curvetype=expo points=40,40 [mixer] src=AIL dest=Ch2 switch=FMODE1 scalar=80 curvetype=expo points=30,30 [mixer] src=AIL dest=Ch2 switch=FMODE2 curvetype=expo points=20,20 [channel3] reverse=1 template=expo_dr [mixer] src=ELE dest=Ch3 scalar=60 curvetype=expo points=40,40 [mixer] src=ELE dest=Ch3 switch=FMODE1 scalar=80 curvetype=expo points=30,30 [mixer] src=ELE dest=Ch3 switch=FMODE2 curvetype=expo points=20,20 [channel4] reverse=1 scalar=40 template=expo_dr [mixer] src=RUD dest=Ch4 scalar=60 curvetype=expo points=40,40 [mixer] src=RUD dest=Ch4 switch=FMODE1 scalar=80 curvetype=expo points=30,30 [mixer] src=RUD dest=Ch4 switch=FMODE2 curvetype=expo points=20,20 [channel5] safetysw=RUD DR safetyval=-30 template=expo_dr [mixer] src=Ch5 dest=Ch5 scalar=30 usetrim=0 curvetype=fixed [mixer] src=Ch5 dest=Ch5 switch=FMODE1 scalar=25 usetrim=0 curvetype=fixed [mixer] src=Ch5 dest=Ch5 switch=FMODE2 scalar=25 usetrim=0 curvetype=fixed [channel6] template=complex [mixer] src=THR dest=Ch6 switch=FMODE0 usetrim=0 curvetype=5point points=-40,15,48,65,75 [mixer] src=THR dest=Ch6 switch=FMODE1 usetrim=0 curvetype=5point points=-70,-16,25,60,90 [mixer] src=THR dest=Ch6 switch=FMODE2 usetrim=0 curvetype=3point points=-100,-5,90 [mixer] src=THR dest=Ch6 switch=RUD DR usetrim=0 curvetype=3point points=-100,0,100 [channel8] max=100 min=-100 template=simple [mixer] src=Ch8 dest=Ch8 usetrim=0 curvetype=5point points=-97,71,0,-52,95 [trim1] src=LEFT_V pos=TRIMLV+ neg=TRIMLV- [trim2] src=RIGHT_V pos=None neg=None step=0 [trim3] src=LEFT_H pos=None neg=None step=0 [trim4] src=RIGHT_H pos=None neg=None step=0 [trim5] src=Ch5 pos=TRIM_L+ neg=TRIM_L- value=-100 [trim6] src=Ch6 pos=TRIM_R+ neg=TRIM_R- [timer1] type=countdown src=THR time=300 [timer2] src=THR [safety] Auto=min [gui-qvga] trim=4in barsize=half box1=Ch1 box2=Timer1 box3=Timer2 box4=Ch6 bar1=Ch1 bar2=Ch2 bar3=Ch3 bar4=Ch5 toggle1=FMODE0 tglico1=1 toggle2=FMODE1 toggle3=FMODE2 tglico3=2 toggle4=RUD DR tglico4=4
model_config/trex_450_pro_fbl_tarot_xyz/model3.txt (25918 views) · Last modified: 2012/10/24 13:51 by NewJocker
Except where otherwise noted, content on this wiki is licensed under the following license: CC Attribution-Share Alike 4.0 International
