Joomla says you aren't logged in
model_config:wl_toys_v931_config_for_devo10:model2
name=V931 mixermode=Advanced [radio] protocol=KN num_channels=11 tx_power=150mW [protocol_opts] Re-bind=No 1Mbps=No Format=WLToys DynTrim=Off [channel1] template=simple [mixer] src=THR dest=Ch1 [channel2] template=expo_dr [mixer] src=AIL dest=Ch2 curvetype=expo points=60,60 [mixer] src=AIL dest=Ch2 switch=MIX1 scalar=85 curvetype=expo points=60,60 [mixer] src=AIL dest=Ch2 switch=MIX2 scalar=125 curvetype=expo points=0,0 [channel3] template=expo_dr [mixer] src=ELE dest=Ch3 curvetype=expo points=60,60 [mixer] src=ELE dest=Ch3 switch=MIX1 scalar=95 curvetype=expo points=60,60 [mixer] src=ELE dest=Ch3 switch=MIX2 scalar=125 curvetype=expo points=0,0 [channel4] template=expo_dr [mixer] src=RUD dest=Ch4 curvetype=expo points=60,60 [channel5] template=simple [mixer] src=AIL DR1 dest=Ch5 curvetype=min/max points=0 [mixer] src=RUD DR1 dest=Ch5 curvetype=min/max points=0 [channel6] template=simple [mixer] src=RUD DR1 dest=Ch6 curvetype=min/max points=0 [channel7] template=simple [mixer] src=FMODE2 dest=Ch7 curvetype=min/max points=0 [channel8] template=simple [mixer] src=FMODE0 dest=Ch8 scalar=-100 curvetype=min/max points=0 [channel9] template=simple [channel10] template=simple [channel11] template=simple [datalog] switch=None rate=1 sec [safety] [gui-128x64] V-trim=59,10,1 H-trim=5,59,3 V-trim=65,10,2 H-trim=74,59,4 Small-box=2,22,Ch1 Small-box=2,31,Ch2 Small-box=2,40,Ch3 Model=75,20 Battery=102,1 Toggle=4,10,0,3,0,RUD DR Toggle=13,10,2,65,129,MIX Toggle=22,10,1,64,194,FMODE Toggle=31,10,0,0,0,None Toggle=40,10,0,0,0,None TxPower=102,7 quickpage1=Telemetry monitor
model_config/wl_toys_v931_config_for_devo10/model2.txt (41625 views) · Last modified: 2016/04/13 03:07 by Djo08400
Except where otherwise noted, content on this wiki is licensed under the following license: CC Attribution-Share Alike 4.0 International
