Failsafe don't work

Start
Prev
1
Next
End

ej189
Topic Author
Offline

03 Dec 2012 07:26 #3535 by ej189

Failsafe don't work was created by ej189

Had tried on RX-2622V, RX1002, Blades NANO CPX, there will be no any action if Tx power off only.

Please Log in or Create an account to join the conversation.

Hexperience
Offline

03 Dec 2012 11:39 #3546 by Hexperience

Replied by Hexperience on topic Failsafe don't work

Are you talking about the fail safe settings in the deviation firmware? That's only for specific walkera rx's. For sure that will not work in a blade nano cpx. I don't know which rx's support getting their fail safe settings from the tx, but if you are sure that the RX1002 works with the stock firmware then we have something to compare.

There are 10 types of people in this world. Those that understand binary and those that don't.

Please Log in or Create an account to join the conversation.

ej189
Topic Author
Offline

03 Dec 2012 22:36 #3595 by ej189

Replied by ej189 on topic Failsafe don't work

OK, at least all Walkera receivers do support fail safe function that I used to test transmitter availible range with it.
I want to compare how the Tx power settings work that I had done on DEVO10 and WK2801 before.

Please Log in or Create an account to join the conversation.

PhracturedBlue
Offline

04 Dec 2012 03:28 #3600 by PhracturedBlue

Replied by PhracturedBlue on topic Failsafe don't work

You are the 1st person to notice that I forgot to implement it.
I have checked in support for failsafe and tested that it works on my RX1202.

Please Log in or Create an account to join the conversation.

vlad_vy
Offline

04 Dec 2012 04:37 #3603 by vlad_vy

Replied by vlad_vy on topic Failsafe don't work

PB, can you check/implement failsafe for DSM2 protocol? DSM2 receiver takes failsafe values in time of binding.

Please Log in or Create an account to join the conversation.

ej189
Topic Author
Offline

04 Dec 2012 07:56 #3611 by ej189

Replied by ej189 on topic Failsafe don't work

Thanks, got it work on DEVO at last but still don't work in 2801.

Please Log in or Create an account to join the conversation.

Start
Prev
1
Next
End

Time to create page: 0.044 seconds

Force desktop display