Trainer Port on Devo 8 - in DSM mode

Start
Prev
1
Next
End

clearprop88
Topic Author
Offline

02 Feb 2013 19:09 #5914 by clearprop88

Trainer Port on Devo 8 - in DSM mode was created by clearprop88

This may have been addressed before, but I couldn't find the post.

Can I hard wire between the trainer ports on a Spectrum DX8, and my Devo 8 (in DSM protocol), and have them function as Master,and slave for training?

Please Log in or Create an account to join the conversation.

FDR
Offline

02 Feb 2013 19:14 #5915 by FDR

Replied by FDR on topic Trainer Port on Devo 8 - in DSM mode

So far deviation only supports PPM out, and you have to change the protocol to achieve it, but at least you can make the PPM signal and the channel order to be appropriate for the DX8.

Please Log in or Create an account to join the conversation.

clearprop88
Topic Author
Offline

02 Feb 2013 20:43 #5917 by clearprop88

Replied by clearprop88 on topic Trainer Port on Devo 8 - in DSM mode

Let me see if I understand.
If I use my model config for my Blade 300X, and then change to PPM instead of DSM then it will work in trainer mode.
Is this correct?

Please Log in or Create an account to join the conversation.

rbe2012
Offline
So much to do, so little time...

02 Feb 2013 20:59 #5919 by rbe2012

Replied by rbe2012 on topic Trainer Port on Devo 8 - in DSM mode

I did not try this by myself, but deViation can only work as master at the moment.

Please Log in or Create an account to join the conversation.

clearprop88
Topic Author
Offline

02 Feb 2013 22:04 #5926 by clearprop88

Replied by clearprop88 on topic Trainer Port on Devo 8 - in DSM mode

OK, thanks. I guess I'll just stay away from it for now, and stay with Spectrum TX's.

Please Log in or Create an account to join the conversation.

Hexperience
Offline

02 Feb 2013 22:18 #5927 by Hexperience

Replied by Hexperience on topic Trainer Port on Devo 8 - in DSM mode

No. Devo is the skave. Just send ppm out the trainer port just like you would to a simulator. All that you send is the stick data the dx8 does thw rest

There are 10 types of people in this world. Those that understand binary and those that don't.

Please Log in or Create an account to join the conversation.

clearprop88
Topic Author
Offline

02 Feb 2013 23:21 #5930 by clearprop88

Replied by clearprop88 on topic Trainer Port on Devo 8 - in DSM mode

That's just what I wanted, to use my Devo as the slave.
Thanks Hexperience.
I'll give it a try during the week, and report how it goes.

Please Log in or Create an account to join the conversation.

Hexperience
Offline

02 Feb 2013 23:30 #5931 by Hexperience

Replied by Hexperience on topic Trainer Port on Devo 8 - in DSM mode

Obviously test it first, I've never tried trainer mode on a 6 channel heli, so you need to make sure that pitch and throttle are correctly mapped. If you are just doing a 4 channel plane its pretty straight forward.

There are 10 types of people in this world. Those that understand binary and those that don't.

Please Log in or Create an account to join the conversation.

clearprop88
Topic Author
Offline

03 Feb 2013 02:02 #5937 by clearprop88

Replied by clearprop88 on topic Trainer Port on Devo 8 - in DSM mode

That's exactly what we'll do. 4 Ch plane first then heli.

Please Log in or Create an account to join the conversation.

rbe2012
Offline
So much to do, so little time...

03 Feb 2013 08:31 #5952 by rbe2012

Replied by rbe2012 on topic Trainer Port on Devo 8 - in DSM mode

Hexperience wrote: No. Devo is the skave.

For sure. The master is the one who controls the ppm input. Sorry for the mixup.

Please Log in or Create an account to join the conversation.

Start
Prev
1
Next
End

Time to create page: 0.035 seconds

Force desktop display