delayed Flap system for fixed wing

Is it able to add delayed flap system ?

in DX8, you can set a delay from 0.1s to 16s for flap input. When you switch on the flap, it will slowly and smoothly feed in the flap within the time selected

So you will not experience a sudden deceleration when you switch on the flap.

Arh.....

Sorry, I spent an hour digging thru and still cannot find it......

Would you mind teach me how to go to the setting?

Go on the mixer config page where the channels are listed on the left (1-ELE, 2-AIL, ...) and the chosen mixer on the right (simple, expo, complex...).
When you touch the "1-ELE" button a config page opens where you can make channel-specific configurations, with the last one you can change the speed setting.

oh....got it. Thanks

I tried to find it in a vir channel and have some test

Yes, speed is not available in a virtual channel, which I'm still hoping will change. If I was a better programmer I'd try it myself, but I don't want to hack at the mixer too much.

Once speed can be used on a virtual channel and is applied in such a way that it can be used as a source, we can do some neat tricks with the speed setting.

Maybe I'll have a hack at it just to see what happens in the emulator...

In fact I think that at this time if your flap system use the AIL/ELEV servos, it's not possible because you can only set speed for servo... Hexperience is right when he says that we need to be able to set speed by mixer.

if there is a spare ch like aux he could use that channel as a source for the flaps and slow that chan.
Might have to try that on my own. humm.