replacement stock 2.4 module

Hi all.

I was wondering if anyone knows if there is a replacement for the stock 2.4 module.
The reason I am asking is because as I was doing the increase range mod, I messed up in the process. I basically burnt one of the the connection point of the diode so solder no longer flows ( I think I was able to connect two point but am not certain, as it's hard to see) on it as well as destroyed the resister beside due to my soldering iron being too close.

However, I am still able to control bind and control my model. I am relived of that but don't want to rick losing control of the model in the air trying it out.

Anyone advise me?

Many thanks in advance!

I wonder if www.rc711.com/shop/walkera-devention-upg...72.html?cPath=167_24 works?

Yes it works!

domcars0 wrote: Yes it works!

Thanks for the info but do you by any chance have details on how to do it? I did a search on google but cant find any information about it.

www.wowhobbies.com/walkeradevo8telemetryconversionmodule.aspx

My bad. I

I forgot to mention that it's a 7e. haha

PhracturedBlue wrote: I think he wants to install it into a devo7e.
Yes it will work. There was a discussion on these forums about doing it a couple months ago, it is not too hard to do.

Thank you for your help.

like you said it did appear in past post. I had to search for WK-21201RF instead of WK-DEVO-S-MOD
For those who are wondering the same thing. The following is
the 8s module pinout (using the numbering in the flysky docs):
1: chip select
2: SCK
3: GND
4: MOSI
5: MISO
6: V+
10:Reset

The Devo7e:
1) Chip Select
2) SCK
3) MISO
4) MOSI
5) Reset
6) V+
7) GND

So happy I can still use this tx. Really love the design and Deviationtx!

Now the question is which direction does the pinout on the devo 8s go?

www.rc711.com/shop/imagemagic.php?img=nN...800&h=600&page=popup

This would be great, unfortunately I cant find stock anywhere... The only place that has them is wow hobbies at 3 x the price of the China sellers, and from the US it takes ages to the UK....

Fishfiend wrote: This would be great, unfortunately I cant find stock anywhere... The only place that has them is wow hobbies at 3 x the price of the China sellers, and from the US it takes ages to the UK....

www.hobbyone.com.hk/cn/product.jsp?id=10896

They're not as nice as Miracle Mart to work with, but they have stock. They're actually owned by Walkera.

Edit: Pfff FDR beat me to it.

Just come back into stock at www.ehirobo.com pretty quick from HK to UK..unfortunately price is now $20.

S**t! I knew I should have bought it when it was 10$

In order to replace 7e module with 8s's I am going to remove the original one.
But there are unknown soldering spots as below picture in blue circle.
Do these spots have specific purposes or just glue the module?
Please let me know otherwise let me know the whole process of the removing the module.

I think this spots are just for well 'ground' (put a good 0 Volt) the module.

domcars0 wrote: I think this spots are just for well 'ground' (put a good 0 Volt) the module.

and mechanical strength to take strain of the soldered connections when the Tx is bumped or dropped.