Devo 10 module upgrades. Testing?

More
13 Jun 2013 14:25 #10926 by undeliverable
Devo 10 module upgrades. Testing? was created by undeliverable
I attempted to get a Skyartec module working on my Devo 10 last night but I am unable to get it to bind to my Wasp. Beyond trying to bind it to the Wasp and fly it I am not sure what other debugging techniques to use to find the problem. I updated the tx.ini with enable-cc2500=A13 and has_pa-cc2500=1. Anyone have any pointers for me?

The module I am using is here :

CC2500 PA

I mostly used the photos on this site to help me along :

Here

I have no photos at the present time but I will post some later if needed.

Also, if I want to replace the big bulky antenna with a wire, what do I need to do?

Please Log in or Create an account to join the conversation.

More
14 Nov 2013 11:41 #15568 by Dawiev
Replied by Dawiev on topic Devo 10 module upgrades. Testing?
Hi, after lots of trails and tribulations (lots of different modules), I got it to work.

I believe the bind procedure is the key, once your module is properly soldered and connected. Please see the details in :

www.deviationtx.com/forum/6-general-disc...r-wasp-nano-bl#15567

Please Log in or Create an account to join the conversation.

Time to create page: 0.030 seconds
Powered by Kunena Forum