How to assign a switch to a channel

Start
Prev
1
Next
End

Pattaya01
Topic Author
Offline

19 Jun 2013 01:54 - 19 Jun 2013 02:35 #11103 by Pattaya01

How to assign a switch to a channel was created by Pattaya01

I haven't figured out yet how to assign a 3 way switch to a channel. What I need is this:

FMOD switch to channel 7, -100%, 0%, +100%.

Is there a simple way to do this or does it have to be done through the mixers? If through the mixers, how to do that?

Edit: I know how to do through the mixer...

Last edit: 19 Jun 2013 02:35 by Pattaya01.

Please Log in or Create an account to join the conversation.

rbe2012
Offline
So much to do, so little time...

19 Jun 2013 10:47 #11112 by rbe2012

Replied by rbe2012 on topic How to assign a switch to a channel

There is no other way but the mixer...

Please Log in or Create an account to join the conversation.

dwhacks
Offline

06 Aug 2013 03:08 #12781 by dwhacks

Replied by dwhacks on topic How to assign a switch to a channel

I dont even get how to do this with the mixer! ha.

Please Log in or Create an account to join the conversation.

FDR
Offline

06 Aug 2013 05:07 #12782 by FDR

Replied by FDR on topic How to assign a switch to a channel

You can use the Expo&DR template for that:
- leave the source at none;
- select fixed as the function;
- choose the FMODE1 and FMODE2 for the switches;
- set -100, 0 and +100 for the scale values.

Please Log in or Create an account to join the conversation.

dwhacks
Offline

06 Aug 2013 12:31 #12789 by dwhacks

Replied by dwhacks on topic How to assign a switch to a channel

Thank you!

Please Log in or Create an account to join the conversation.

Infamous2117
Offline

06 Sep 2016 10:36 #53542 by Infamous2117

Replied by Infamous2117 on topic How to assign a switch to a channel

I just used this to setup up flight modes on my CC3D.

You are a lifesaver my friend!

Please Log in or Create an account to join the conversation.

Start
Prev
1
Next
End

Time to create page: 0.036 seconds

Force desktop display